NANO Modules ALT Bedienungsanleitung
Lies die bedienungsanleitung für NANO Modules ALT (7 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu NANO Modules ALT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/7
ALT
Quick guide
Thank you for choosing ALT Quad VCA
for your Eurorack System.
Powering up
Turn off the power of your modular synthesizer.
Double check the power cord polarity. If you plug the module backwards you might
damage its electronic circuits.
If you flip over your ALT Quad VCA, you will find the “RED” mark at the PCB power
connector, which must match the colored line on the ribbon cable.
Once you have checked all the connections, you can turn on your modular system.
If you notice any anomalies, turn your system off right away and check again your
connections.
1.
2.
3.
4.
NANO Modules - València 2019 ©
Description
ALT is a Quadruple Voltage-Controlled Amplifier, which is an electronic device
that uses electric power to vary the amplitude of a signal applied to its input
terminals, producing a signal proportional to the control voltage at its output.
The amount of amplification provided by an amplifier is measured by its , which gain
is the ratio of output voltage, current, or power to input. There is no signal processing
in a VCA, just overall volume control.
ALT has 4 channels of voltage controlled amplifiers:
• VCAs 1, 2, 3. Each one is equipped with a GAIN control, and a CV IN Attenuverter.
• VCA 4. GAIN CV IN and the signal normalled to +5V (fully open VCA).
Additionally, the outputs of these channels are cascaded from left to right, allowing
ALT to behave as a four-channel mixer.
REDRED
ALT
Layout
This image will clarify the function of each of the elements of the module.
NANO Modules - València 2019 ©
ALT
VCA 1
VCA 2
VCA 3
1 2 3 4
CV1 CV2 CV3 CV4
ALT
1 2 3 4
+-
CV2
+-
CV1
+-
CV3
Signal Inputs
Gain
Signal Level Control
CV Level
Attenuverter
CV Input Control
Level Indicator
Signal Outputs
Each output is normalled to the
mix input of the adjacent one.
CV4 Input
VCA 4
This VCA can be
controlled by CV4 Input.
Signal Gain Control.
This CV input is normalled
to 5V (fully open VCA).
Signal Gain Control.
CV 1,2,3 Inputs
Produktspezifikationen
| Marke: | NANO Modules |
| Kategorie: | Nicht kategorisiert |
| Modell: | ALT |
Brauchst du Hilfe?
Wenn Sie Hilfe mit NANO Modules ALT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert NANO Modules
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
24 August 2024
Bedienungsanleitung Nicht kategorisiert
- StarIink
- Microlife
- Ferguson
- Em-Trak
- JYSK
- Sureguard
- ALM
- Olight
- TRENDnet
- Metra
- Hyundai
- IStarUSA
- Avidsen
- DoorBird
- Playtive
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025