NEC Multi Screen Tool Bedienungsanleitung
NEC
Nicht kategorisiert
Multi Screen Tool
Lies die bedienungsanleitung für NEC Multi Screen Tool (41 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 59 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 30 Bewertungen. Hast du eine Frage zu NEC Multi Screen Tool oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/41
Multi Screen Tool
User Ma’s nual
NEC Projector User Supportware
2
Introduction
Thank you for using the Multi Screen Tool.
Please read this User's Manual carefully to aid in the proper use of this product before using the Multi Screen Tool.
The Multi Screen Tool is a software application for easy performing stacked projection using the "Geometric
Correction" function of NEC projectors and tiled projection using the "Edge Blending" function.
This manual mainly describes operations for the NP-PA600 series.
Terminology
In this manual,
• "Stacking correction" refers to all of the processes below using the Multi Screen Tool.
1. Use the web camera to take pictures of the images projected by multiple projectors.
When not using the web camera, project the video of the computer using multiple projectors
2. Perform comparisons and calculations so that the content of the projected images is superimposed, and
create the GEOMETRIC CORRECTION data
3. Send the [GEOMETRIC CORRECTION] data to each projector
• "Tiling correction" refers to all of the processes below using the Multi Screen Tool.
1. Use the web camera to take pictures of the images projected by multiple projectors.
When not using the web camera, project the video of the computer using multiple projectors
2. Create the GEOMETRIC CORRECTION data for joining the projected images and projecting them within
the screen's frame and the specied range, and create the "Edge Blending" data to adjust the brightness
of the seams.
3. Send the "GEOMETRIC CORRECTION" and "Edge Blending" data to the respective projectors.
About copyrights of projected images
When using this software to project images for commercial purposes or public viewing, reducing the projected area
or reshaping the image with respect to the original may infringe upon the rights of the copyright holder as protected
by copyright laws.
When performing tiled or stack projection, be careful with discrepancies in the aspect ratio and with distortion in the
projected images.
NOTE
(1) Unauthorized reproduction of a part of or all of the content of this manual is prohibited.
(2) The content of this manual is subject to change without notice.
(3) Great care has been given to the creation of the content of this manual; however, should you notice any
questionable points, errors, or omissions, please contact us.
(4) Notwithstanding section (3), NEC will not bear any responsibility for claims due to loss, lost profit, or other
matters for reason of the use of this software.
3
Stacking correction
Create the geometric correction data so that the projected images
of two to four projectors are superimposed on one another.
Stacking lets you achieve high brightness projections.
Tiling correction
Create geometric correction data to project a single image using
two to four projectors.
Also, use the edge blending function to adjust for the difference
in brightness at the seams where the projected images overlap to
achieve a seamless image with a sense of unity.
With a short projection distance, you can achieve high brightness
projections.
Effects of stacking/tiling correction
Produktspezifikationen
| Marke: | NEC |
| Kategorie: | Nicht kategorisiert |
| Modell: | Multi Screen Tool |
Brauchst du Hilfe?
Wenn Sie Hilfe mit NEC Multi Screen Tool benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert NEC
15 Juni 2025
15 Juni 2025
19 September 2024
19 September 2024
19 September 2024
13 September 2024
9 September 2024
3 September 2024
2 August 2024
31 Juli 2024
Bedienungsanleitung Nicht kategorisiert
- Ruark Audio
- Adidas
- Casio
- ChamSys
- UDG Gear
- Vicks
- Naish
- InFocus
- 909 Outdoor
- ALM
- Lehle
- Nedis
- Foscam
- Flexispot
- Citronic
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025