Nedis WIFICI20CGY Bedienungsanleitung

Lies die bedienungsanleitung für Nedis WIFICI20CGY (8 Seiten) kostenlos online; sie gehört zur Kategorie Überwachungskamera. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 6 Bewertungen. Hast du eine Frage zu Nedis WIFICI20CGY oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Full manual Nedis SmartLife ™

Download the app: Nedis SmartLife from Apple App store or Google Play Store.

Create account

Select country code and enter full naonal phone number or email address and then

request vericaon code.

Enter received vericaon code and pick your own password.

Add device

1.Tap “+” on the top right corner. A list of potenal products appears.

2.Select the device type you want to add from the list

3.Acvate the device to be added by plugging it in or connecng the baer y.

4.Make sure the indicaon LED (or the lighng device) ashes quickly (as shown in example in the

applicaon) and tap the buon to conrm.

If the light is not ashing quickly hold the reset buon (or switch the bulb o and on for 3 mes) unl

it ashes.

5.Conrm your phone is connected to the Wi-Fi network to which the device will be added, enter the

Wi-Fi password and conrm.

6.Now the device will be searched, make sure your phone and the device are close to the router to

opmize recepon.

7.Aer the product is found and added, rename it so you can easily recognize it.

If above method fails (this can be due to unstable network or specic network protecon) add the device using

AP mode by following the steps below.

Add device (AP mode)

1.Tap “+” on the top right corner. A list of potenal products appears.

2.Select the device type you want to add from the list

3.Hold the reset buon (or switch the bulb o and on for 3 mes) unl the indicaon LED (or lighng

device) ashes (as shown in example) SLOWLY

If the light is ashing quickly, reset again by holding the reset buon for about 5 seconds or switching

the light o and on 3 mes.

4.Conrm the Wi-Fi network to which the device will be added, enter the Wi-Fi password and conrm.

5.Connect -Fi hotspot (SmartLife_xxxx) your phone to the device’s Wi

6.If asked: conrm to stay connected to Wi-Fi network without internet access

7.Go back to the Nedis SmartLife applicaon to connue installaon.

8.Now the device is sent the instrucons to connect to your exisng Wi-Fi network, make sure your

phone and the device are close to the router to opmize recepon.

9.Aer the product is found and added, rename it so you can easily recognize it.

Produktspezifikationen