Netgear GS524v3 Bedienungsanleitung

Lies die bedienungsanleitung für Netgear GS524v3 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 46 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 23.5 Bewertungen. Hast du eine Frage zu Netgear GS524v3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

24-port Gigabit Ethernet Unmanaged Switch

Model GS524v3

•NETGEAR 24-port Gigabit Ethernet Unmanaged Switch Model GS524v3

•Power cord (varies by region)

•Wall-mount installation kit

•Rack-mount brackets and screws

•Rubber feet

•Installation Guide

Package contents

2.Connect the switch

November 2022

3.Connect to power

This switch is designed for indoor use only. If you want to connect it to a device located

outdoors, the outdoor device must be properly grounded and surge protected, and you

must install an Ethernet surge protector inline between the switch and the outdoor device.

Failure to do so can damage the switch.

WARNING: Before connecting this switch to outdoor cables or devices, see

https://kb.netgear.com/000057103 for safety and warranty information.

1.Register the switch

1. From a computer or mobile device that is connected to the Internet, visit

my.netgear.com.

2. Log in to your NETGEAR account.

NOTE: If you don’t have a free NETGEAR account, you can create one.

The Your Registered Products page displays.

3. Click the REGISTER NEW PRODUCT button.

4. In the SERIAL NUMBER eld,typetheserialnumberofyourswitch.

The serial number is 13 digits long. It is printed on the switch label.

5. From the PURCHASE DATE menus, select the date that you purchased the switch.

6. Click the button.REGISTER

Your switch is registered to your NETGEAR account.

AconrmationemailissenttoyourNETGEARaccountemailaddress.

Sample connections

DesktopIP cameraSmart TV

LaptopServer

Printer

WAX214v2 AP

Desktop

GS524v3 switch

Router

Internet

4.Check the LEDs

When you connect the power cord to the switch and plug the cord into an electrical outlet,

the LEDs at the left of the front panel indicate the status:

LEDDescription

Power LED

Solid green: The switch is powered on and operating normally.

Off:Power is not supplied to the switch.

Numbered Port

LED

(Link and Activity)

Solid green: Link on this port.

Blinking green: Activity on this port.

Off: No link is detected on this port.

Square Port LED

(Speed)

Solid green: 1 Gbps link on this port.

Solid yellow: 100 Mbps or 10 Mbps link on this port.

Installation Guide

Produktspezifikationen