Netgear PS101 Bedienungsanleitung
Netgear
Druckserver
PS101
Lies die bedienungsanleitung für Netgear PS101 (16 Seiten) kostenlos online; sie gehört zur Kategorie Druckserver. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu Netgear PS101 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/16
Installation Guide
Mini Print Ser ver
MODEL PS101
Technical Support
YOU MUST REGISTER TO OBTAIN TECHNICAL SUPPORT. PLEASE RETAIN
PROOF OF PURCHASE AND THE WARRANTY INFORMATION.
To register your product, get product support or obtain product information and product
documentation, go to http://www.NETGEAR.com/register.
You will find technical support information at http://www.NETGEAR.com through the
Customer Support area. If you want to contact technical support by telephone, see the support
information card for the correct telephone number for your country.
Technical support is available 24 hours a day, 7 days a week.
NETGEAR, INC.
E-mail: support@NETGEAR.com
www.NETGEAR.com
©2002 by NETGEAR, Inc. All rights reserved.
NETGEAR and AutoUplink are trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or
other countries. Other brand and product names are trademarks or registered trademarks of their respective holders.
Information is subject to change without notice.
Introduction
Thank you for purchasing a NETGEAR PS101
Mini Print Server. With this print server you can
share your printer with all the computers in your
home or office that run Microsoft® Windows®
95 OSR2, 98, 2000, NT 4.x, Me, or XP
operating system.
This installation guide shows you how to connect
the print server to your printer and configure it to
use with your computers. Setup is easy – if you
follow the instructions in this guide, the print server
will soon be up and running for your computers.
If you have problems, there is a troubleshooting section on page 9 to help you. You can get
more detailed troubleshooting information from the Reference Manual on the CD or online at
www.NETGEAR.com in our Support section.
Installation Procedure Overview
Estimated time: 30 minutes
1. Unpack the box and verify the contents.
2. Connect the print server to the printer and to the network.
3. Configure the print server to be recognized on the network.
4. Configure each computer to print through the print server.
Note: You only need to go through procedures 1 through 3 once. Repeat procedure
4 for each computer that will share the printer with the print server. It takes less
than 5 minutes to configure and test each computer.
On the CD, you will find a containing more detailedPS101 Resource Reference Manual
information about installation, troubleshooting and configuration.
1
Produktspezifikationen
| Marke: | Netgear |
| Kategorie: | Druckserver |
| Modell: | PS101 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Netgear PS101 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Druckserver Netgear
30 Juli 2024
28 April 2024
29 Februar 2024
30 Oktober 2022
Bedienungsanleitung Druckserver
- Gembird
- SEH
- TP-Link
- Iogear
- Digitus
- AirLive
- Silex
- HP
- Dymo
- Hawking Technologies
- EXSYS
- Edimax
- Lindy
- Lexmark
- Hamlet
Neueste Bedienungsanleitung für -Kategorien-
28 September 2024
24 September 2024
18 September 2024
18 September 2024
14 September 2024
6 September 2024
3 September 2024
1 September 2024
1 September 2024
1 September 2024