Numark Party Mix Bedienungsanleitung
Numark
DJ Ausrüstung
Party Mix
Lies die bedienungsanleitung für Numark Party Mix (28 Seiten) kostenlos online; sie gehört zur Kategorie DJ Ausrüstung. Dieses Handbuch wurde von 41 Personen als hilfreich bewertet und erhielt im Schnitt 3.5 Sterne aus 21 Bewertungen. Hast du eine Frage zu Numark Party Mix oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/28
User Guide
English ( 2 – 6 )
Guía del usuario
Español ( 7 – 11 )
Guide d’utilisation
Français ( 12 – 16 )
Guida per l’uso
Italiano ( 17 – 21 )
Benutzerhandbuch
Deutsch ( 22 – 26 )
Appendix
English ( 27 )
2
User Guide (English)
Introduction
Box Contents
Party Mix
Software Download Card
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit numark.com.
For additional product support, visit numark.com/support.
Setup
To start using Party Mix:
1. Locate the Serato DJ Lite installation card in the box to download and install the
software.
2. Connect Party Mix’s USB cable to an available USB port on your computer.
3. Connect output devices (headphones, speakers, etc.) to Party Mix.
4. Open the software and start DJ’ing!
Connection Diagram
Computer
Head
p
hones
Speakers
3
Features
Front Panel
1
2
4
3
5
6
7
8
9 9
10
11 11
12 12
13 13
14
15 16 17
18 19
6
7
8
14
15 16 17
20
18 19
20
1. Browse Knob: Rotate this knob to cycle through crates and tracks. Press it to move
forward in the software panels.
2. Load: Press one of these buttons while a track is selected to assign it to Deck 1 or 2,
respectively, in the software.
3. Master Gain: Adjusts the master volume in the software.
4. Cue Mix: Adjusts the software’s audio output to the headphones, mixing between the
cue output and the master mix output.
5. Cue Gain: Adjusts the volume for headphone cueing in the software.
6. Gain: Adjusts the pre-fader, pre-EQ audio level of the corresponding channel in the
software.
7. High EQ: Controls the treble frequencies for the individual channels.
8. Low EQ: Controls the bass frequencies for the individual channels.
9. Channel Volume: Adjusts the volume of the individual channels in the software.
10. Crossfader: Controls the blend between the two decks.
11. PFL/Cue: Press this button to send this channel's pre-fader signal to the Cue Channel for
monitoring. When engaged, the button will be lit. By pressing one PFL button at a time,
you will cue that channel alone (and deactivate PFL monitoring for the other channels). To
cue to multiple channels simultaneously, press the PFL buttons for those channels at the
same time.
12. Platter/Jog Wheel: This jog wheel controls the audio when the wheel is moved. When
the Scratch button is not active, use the jog wheel to bend the pitch of the track. When
the Scratch button is active, use the jog wheel to grab and move the audio, “scratching”
the track as you would with a vinyl record.
Produktspezifikationen
| Marke: | Numark |
| Kategorie: | DJ Ausrüstung |
| Modell: | Party Mix |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Numark Party Mix benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung DJ Ausrüstung Numark
14 August 2024
6 August 2024
5 August 2024
4 August 2024
29 Juli 2024
26 Juli 2024
26 Juli 2024
22 Juli 2024
21 Juli 2024
15 Juli 2024
Bedienungsanleitung DJ Ausrüstung
- Vexus
- Skytec
- Denon
- NewStar
- Citronic
- Roadstar
- UDG Gear
- Zoom
- Krüger And Matz
- Velleman
- Chauvet
- Denver
- Akai
- Serato
- AudioQuest
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
14 Juni 2025
14 Juni 2025
11 Juni 2025
1 Juni 2025
15 Oktober 2024
8 Oktober 2024
2 Oktober 2024
29 September 2024
28 September 2024