Nutrichef PKBRTP100 Bedienungsanleitung

Lies die bedienungsanleitung für Nutrichef PKBRTP100 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 37 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 5 Bewertungen. Hast du eine Frage zu Nutrichef PKBRTP100 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

www.NutrichefKitchen.comwww.NutrichefKitchen.com

Homebrew

Mini Keg System

PKBRTP100PKBRTP50

UNIT OPERATION INSTRUCTIONS

PART ONE: SPEAR ASSEMBLY

1. Please clean mini-keg, cap, spear body, faucet and beer

hose with warm water and mild soap before use.

1. Spear Body

2. Cross-bar

3. Twist Tube

4. Pressure Relieving Ring

5. Nut

6. White Flow-control Block

7. Faucet

8. Faucet Knob

9. Regulator

10. Regulator Base

11. Regulator Knob

12. Gauge

13. 16g C02 Capsule

14. Beer Hose

2. Insert white ow-control block into cross-bar, it would

limit the beer ow and reduce over-foam.

3. Install faucet into spear body, make sure the connection is

proper and tight.

Remark: Improper connection would cause leakage of beer.

4. Cut beer hose according to keg height and insert into

spear, make sure hose can touch bottom of keg without

overlong or over short.

Remark: If beer hose is too short, beer would not be tapped

completely. But if beer hose is too long, it may crimp inside

the keg, because of incomplete tapping.

5. Check whether the regulator knob is in OFF position.

If not, please follow arrow mark instruction to turn the

regulator knob counter clockwise to the OFF position.

2. Insert white ow-control block into cross-bar, it would

limit the beer ow and reduce over-foam.

6. Turn in a new 16g C02 capsule with thread type of 3/8"-24

UNF, turn clockwise rmly into the regulator base.

Important: DON'T stop turning if you hear a slight gas leak

swish, nish turning it in all the way it seal properly.

PART TWO: TAPPING

1. Attach the spear system to the

keg. Make sure they are as tight

as possible to avoid lessening

or leakaging.

2. Connect the regulator to the spear system

Produktspezifikationen