Oben TAB-4M Bedienungsanleitung
Oben
Nicht kategorisiert
TAB-4M
Lies die bedienungsanleitung für Oben TAB-4M (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Oben TAB-4M oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
TAB-2M & TAB-4M
Tripod Accessory Bar
You’re on steady ground®
Thank you for choosing Oben.
Oben’s two-mount (TAB-2M) and four-mount (TAB-4M)
accessory bars turn any tripod into a customizable
workstation. They add a sturdy aluminum bar with
additional mounting points for accessories such as a
camera, light, monitor, microphone, or laptop computer.
The sturdy 23-inch-long, 30 mm aluminum tube
features heavy-duty mounts that are all outfitted with
set screws to securely hold your accessories.
The accessory bar features two side mounts with 3/8-16
threads that are compatible with most tripod heads and
arms. The TAB-4M adds two adjustable top mounts with
1/4-20 threads and included bushings for compatibility
with most cameras and tripod accessories.
Overview (TAB-4M Shown)
Side mounts (3/8-16 thread)
A
B
C
D
E
F
G
H
A
BC
C
EBA
D
F
D
D
B
G H
Set screws
Top mounts (1/4-20 thread, TAB-4M only)
Thumbscrews
Locking handles
Tripod mount socket (3/8-16 thread)
1/4-20 to 3/8-16 bushings (TAB-4M only)
Hex key
Mount the Accessory Bar to the Tripod
Align the tripod’s 3/8-16 threaded post with the
accessory bar’s socket, and tighten with the thumbscrew
until secure.
For increased stability: If the tripod has a set screw,
tighten it until it’s snug, but don’t overtighten it.
Adjusting the Tripod Mount and Top Mounts
1. To adjust the position of the tripod and top mounts,
loosen the locking handle by turning it
counterclockwise.
2. Move the tripod or top mount to the desired position,
and tighten the locking handle by turning it
clockwise.
Note: If the handle is obstructed and won’t turn a full 360°,
pull the handle out to reposition it. Release the handle so it
reengages, and continue to turn.
Important! Before attaching any accessories or cameras
to the bar, make sure the locking handles have been
suciently tightened and the accessory bar is secure
before proceeding.
Side Mounts
1. Screw an accessory, such as a head, onto the side
mount until secure.
2. Use the hex key to tighten the three set screws until
snug. Don’t overtighten the set screws.
Top Mounts (TAB-4M only)
The top mounts have 1/4-20 threaded posts. If an
accessory, such as a head, has a 3/8-16 threaded socket,
screw one of the included reducer bushings into the
socket, and tighten it with a flat screwdriver or coin.
To attach accessories to the top mounts:
1. Align the accessory’s socket with the top mount, and
tighten with the thumbscrew until secure.
2. Use the hex key to tighten the two set screws until
snug. Don’t overtighten the set screws.
Operation
Mounting Accessories to the Bar
Produktspezifikationen
| Marke: | Oben |
| Kategorie: | Nicht kategorisiert |
| Modell: | TAB-4M |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Oben TAB-4M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Oben
30 Mai 2025
30 Mai 2025
30 Mai 2025
21 August 2024
20 August 2024
20 August 2024
19 August 2024
18 August 2024
28 Juli 2024
28 Juli 2024
Bedienungsanleitung Nicht kategorisiert
- Rose
- Goodram
- EZVIZ
- Artusi
- Gill
- General International
- YSI
- KidKraft
- Alpatronix
- Roswell
- Wiha
- Primera
- Bopita
- American DJ
- Step2
Neueste Bedienungsanleitung für -Kategorien-
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025