Onkyo IRK1553D Bedienungsanleitung

Lies die bedienungsanleitung für Onkyo IRK1553D (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 7 Bewertungen. Hast du eine Frage zu Onkyo IRK1553D oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

- 1 -- 4 -

Rack Mount Kit Instruction Manual

PARTS ENCLOSED

1. Rack Mount Panels

･

Actual panels may vary by model.

2. Blank panel A

3.

Blank panel B (For 120 mm (4.7") height model)

4.

Blank panel (For 130 mm (5.1") height model)B

5. Spacer (For 130 mm (5.1") height model)

6. Screws A

･

For attaching the Rack Mount Panles to the

Unit (STEP 2).

7. Screws B

8. Washers A

9. Washers B

×

1×

1

× 1

× 4× 6× 6× 6

×

1×

4

L

R













Remove screws from the right side

of the cover.

Do not remove feet from the

unit. Remove side screws only

from cover as indicated.

STEP

1

CAUTIONS

* Not suitable For In-Wall Mounting.

* Do not ground through the rack mount.

* Do not mount the unit to the rack alone, need one more person to hold the unit.

* Read "Important Safety Instruction" in the instruction manual and install the audio product with caution to avoid blocking its

ventilation.

Improper installation may cause a re or injury.

1. Ensure that there is adequate ventilation above and below the unit.

(according to the unit's instruction manual.)

2. For products that have vents on the side panels, please do not obstruct, in order to allow for ventilation.

3. Do not cover the ventilation holes on the unit installed.

4. For products that generate heat, such as an Amplier or Receiver, please use a minimum of one "U" (1.75") blank panel (or

space) above and below product for ventilation.

For best performance, it is recommended that DVD/CD players should be rack mounted below receivers to protect laser

mechanisms.

5. If rack is installed in a warm or enclose environment, use a cooling fan for ventilation.

* Please use caution when rack mounting products. To balance the weight and to keep the center of gravity as low as possible (in

order to keep from being too top heavy) mount heavier products towards the bottom of the rack.

SN29356000F1803-0

STEP

STEP

4

5

Mount the blank panel B.

Mount the blank panel A.







or







More than one person is

needed for this step.

Please ensure that tack screw

and washers are assembled

as shown below to avoid

grounding through the rack

mount and blank panel B.

Please ensure that tack screw

and washers are assembled

as shown below to avoid

grounding through the blank

panel A.

Rack Mount

Panel

Blank

Panel B

Rack





Blank Panel ARack





Please mount

panel with

sticker on back

side, oriented

as indicated on

sticker.

If the height of the unit being mounted is 155 mm (6.1") (

â

P2)

If the height of the unit being mounted is 120 mm (4.7") or 130 mm (5.1") (

â

P3 - 4)

STEP

2

Produktspezifikationen