Oricom ANU800 Bedienungsanleitung


Seiten 2 Engels Radio

Lies die Bedienungsanleitung für Oricom ANU800 kostenlos online oder lade das PDF herunter. 98 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage

ANU800 UHF CB ANTENNA
FITTING INSTRUCTIONS
Pack includes
•Heavy duty barrel spring base
•Fibreglass radome
•Grub screw and hex key to secure the fibreglass pole
•Low-loss coaxial cable (4.5m)
•Pre-terminated FME connector and PL259 adaptor
IMPOR ANTT- Always fit in accordance with State Road & raffic Safety GuidelinesT
Installation
1.Remove the shroud protecting the cable at the base of the antenna.
2.Install the spring base onto the bracket (not supplied). Tigten in a clockwise
direction using a hexagon wrench or spanne. IMPORAN: Do not exceed 50N.rTT
3. Remove the cap from the top of the spring base and install the fiberglass
extension pole on to the base by turning in a clockwise direction and secure in pce la
with the grub screw (using the hex key provied). Hand tighten only MAX. 15N.

Bewerten Sie dieses Handbuch


Produktspezifikationen

Marke: Oricom
Kategorie: Radio
Modell: ANU800

Brauchst du Hilfe?

Wenn Sie Hilfe mit Oricom ANU800 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten