OSD Audio XSP2-1 Bedienungsanleitung
OSD Audio
Hi-Fi-Anlage
XSP2-1
Lies die bedienungsanleitung für OSD Audio XSP2-1 (1 Seiten) kostenlos online; sie gehört zur Kategorie Hi-Fi-Anlage. Dieses Handbuch wurde von 6 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 3.5 Bewertungen. Hast du eine Frage zu OSD Audio XSP2-1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
XSP2.1 3 Channel Amp
SPECIFICATIONS
• Amplier Type: Class D 2.1 Amplier
• Channels: 2 Stereo Full range, 1 Channel Mono
• Power Handling Subwoofer:
200 Watts RMS/400 Watts Peak Mono @ 4Ω
100 Watts RMS/200 Watts Peak Mono @ 8Ω
• Power Handling Satellites:
2x100 Watts RMS/2X200 Watts Peak Stereo @4Ω
2X50 Watts RMS/2X100 Watts Peak Stereo @8Ω
• Frequency Response: 20Hz - 200Hz (Subwoofer)
• Impedance: 4 & 8 Ohm Stable
• Input Terminals: RCA Signal (Low) Level Analog Inputs
• Input Sensitivity: 250mv
• Crossover: 40Hz to 150Hz (Subwoofer) Mono
• Phase Control: 0-180 degrees (Subwoofer) Mono
• Signal to Noise Ratio: 90 dB
• Controls (Subwoofer): Crossover, Phase, Sub Gain
• Controls (Satellites): Bass & Treble
• Master Volume: Subwoofer and Satellites
• 3 Turn On Options: Normal, Auto On Sensing, 12V Trigger
• 12 Volt Trigger: In and Out
• Power Supply: Switchable 110-240V 50/60Hz
• Dimensions (L x D x H): 430mm/16.92” x 226mm/9.0” x
62.5mm/2.46”
• Weight: 2.7KG/5.95Lb.
A great alternative to an ugly or low-performance sound bar for your big screen TV. Simply connect the
amp to the headphone output of the TV and then connect to your speakers – either in-wall or normal box
speakers – and add a subwoofer. The sound will be much better, and with in-wall subwoofer and speakers
the look is much nicer.
This is also the perfect amp for an outdoor system that comprises main speakers and a passive subwoofer.
200 watts are available to power a subwoofer and 100 watts for each of two patio speakers.
The XSP2.1 can easily achieve the high sound levels of over 100dB from all channels. The additional
convenience of tone controls means you can ne-tune or customize the sound to suit your taste.
You can also use this amp to bring back to life an old sat/sub system where the amp has failed – not
uncommon. Simply bypass the built-in amp and connect the speaker to this amp and you have a working
system again.
OSD Audio | Brea, CA | osdaudio.com
Produktspezifikationen
| Marke: | OSD Audio |
| Kategorie: | Hi-Fi-Anlage |
| Modell: | XSP2-1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit OSD Audio XSP2-1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hi-Fi-Anlage OSD Audio
14 August 2025
7 August 2025
20 Juli 2025
5 September 2024
5 September 2024
19 August 2024
19 August 2024
22 Juni 2023
Bedienungsanleitung Hi-Fi-Anlage
- Boytone
- AudioAffairs
- Trevi
- Coby
- WyreStorm
- CMX
- Accsoon
- AURALiC
- Salora
- Argon
- Scott
- TEAC
- Technics
- Marmitek
- Tascam
Neueste Bedienungsanleitung für -Kategorien-
18 August 2025
18 August 2025
18 August 2025
18 August 2025
17 August 2025
17 August 2025
16 August 2025
16 August 2025
15 August 2025
15 August 2025