Owon OEL8500 Bedienungsanleitung
Owon
Nicht kategorisiert
OEL8500
Lies die bedienungsanleitung für Owon OEL8500 (35 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 2 Bewertungen. Hast du eine Frage zu Owon OEL8500 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/35
Feb. 2025 edition V1.0.1
Copyright © LILLIPUT Company. All rights reserved.
The LILLIPUT's products are under the protection of the patent rights,
including ones which have already obtained the patent rights and those which
are applying for. The information in this manual will replace all that in the
materials published originally.
The information in this manual was correct at the time of printing. However,
LILLIPUT will continue to improve products and reserves the rights to change
specification at any time without notice.
is the registered trademark of the LILLIPUT Company.
Fujian LILLIPUT Optoelectronics Technology Co., Ltd.
No. 19, Heming Road
Lantian Industrial Zone, Zhangzhou 363005 P.R. China
Tel: Fax:+86-596-2130430 +86-596-2109272
Web: www.owon.com.cn info@owon.com.cnE-mail:
General Warranty
We warrant that the product will be free from defects in materials and
workmanship for a period of 2 years from the date of purchase of the product
by the original purchaser from our company. The warranty period for
accessories are 12 months. This warranty only applies to the original
purchaser and is not transferable to a third party.
If the product proves defective during the warranty period, we will either
repair the defective product without charge for parts and labour, or will provide
a replacement in exchange for the defective product. Parts, modules and
replacement products used by our company for warranty work may be new or
reconditioned like new. All replaced parts, modules and products become the
property of our company.
To obtain service under this warranty, the customer must notify our
company of the defect before the expiration of the warranty period. Customer
shall be responsible for packaging and shipping the defective product to our
designated service centre, a copy of the customer's proof of purchase is also
required.
This warranty shall not apply to any defect, failure or damage caused by
improper use or improper or inadequate maintenance and care. We shall not
be obligated to furnish service under this warranty a) to repair damage
resulting from attempts by personnel other than our company representatives
to install, repair or service the product; b) to repair damage resulting from
improper use or connection to incompatible equipment; c) to repair any
damage or malfunction caused by the use of not our supplies; or d) to service
a product that has been modified or integrated with other products when the
effect of such modification or integration increases the time or difficulty of
servicing the product.
Please contact the nearest sales and service offices for services.
Excepting the after-sales services provided in this summary or the
applicable warranty statements, we will not offer any guarantee for
maintenance definitely declared or hinted, including but not limited to
the implied guarantee for marketability and special-purpose
acceptability. We should not take any responsibilities for any indirect,
special or consequent damages.
Table of Contents
1. General Safety Requirements ......................................................1
2. Safety Terms And Symbols .......................................................... 2
3. Quick Start .................................................................................... 3
3.1 Product Introduction ............................................................................3
3.2 Panel and User Interface .................................................................... 4
3.2.1 Front Panel ............................................................................... 4
3.2.2 Rear Panel ................................................................................5
3.2.3 User Interface ........................................................................... 7
3.3 General Inspection ..............................................................................7
3.4 Power-on Inspection ........................................................................... 8
4. Functional features and Panel operation .....................................9
4.1 Turn On/Off the Channel Output ......................................................... 9
4.2 Local/Remote mode Operation switch.............................................. 10
4.3 Constant Mode Operation ................................................................. 10
4.3.1 Constant Current Mode CC .............................................. 10（ ）
4.3.2 Constant Voltage Mode CV .............................................. 12（ ）
4.3.3 Constant Resistance Mode (CR) ............................................ 14
4.3.4 Constant Power Mode (CP) .................................................... 15
4.4 Input Control function ........................................................................17
4.5 Keyboard Lock Function ................................................................... 17
4.6 Short Circuit Simulation Function ......................................................18
4.7 System Menu Function ..................................................................... 19
4.7.1 System Setting ........................................................................19
4.7.2 Parameter Setting ................................................................... 20
4.8 Multiple Device Parallel Function ...................................................... 22
4.8.1 Parallel Output line Connection .............................................. 22
4.8.2 Parallel Communication line Connection ................................ 23
4.8.3 Operating Instructions .............................................................24
4.9 Protection Functions and Fault Information ...................................... 24
4.10 Communication Port Introduction ....................................................26
4.11 Test Function ................................................................................... 27
4.11.1 Dynamic Test Function ..........................................................27
Produktspezifikationen
| Marke: | Owon |
| Kategorie: | Nicht kategorisiert |
| Modell: | OEL8500 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Owon OEL8500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Owon
2 Juni 2025
6 September 2024
13 August 2024
15 April 2024
1 Juli 2023
Bedienungsanleitung Nicht kategorisiert
- Dual
- Meec Tools
- Kindercraft
- Flex
- Chauvet
- Switel
- Suzuki
- Hoshizaki
- Babybjörn
- Shindaiwa
- Amica
- Foliatec
- Steinberg
- EMG
- CVW
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025