Ozito PXGGS-011 Bedienungsanleitung
Ozito
Nicht kategorisiert
PXGGS-011
Lies die bedienungsanleitung für Ozito PXGGS-011 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu Ozito PXGGS-011 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/6
STANDARD EQUIPMENT
PXGGS-011
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Pre-heating Time: 120s
Max. Heating Temp: 170°C
Glue Stick Size: Ø11mm
Weight: 0.4kg
ozito.com.au
0619
Cordless Glue Gun
5 x Ø11mm Glue Sticks
Round Nozzle, Precision
Nozzle & 13mm Hex Spanner
CORDLESS
11MM
GLUE GUN
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button.
2. Slide the battery out.
1. Round Nozzle
2. Nozzle Cover
3. Tool Housing
4. Status Indicator Light
5. On/Off Button
6. Monitoring Window
7. Glue Stick Inlet
8. Battery Seating
9. LED Worklight
10. Flow Control Trigger
11. 5 x Glue Sticks
12. 13mm Hex Spanner
13. Precision Nozzle
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
CORDLESS 11MM GLUE GUN
ACCESSORIES
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
1
2
34
56
7
11
8
12
13
9
10
Installing Glue Sticks
1. Insert the glue stick into the glue stick inlet.
2. Squeeze the ow control trigger multiple times to push the glue stick
further down the channel.
WARNING! IN THE EVENT OF ACCIDENTAL SKIN
CONTACT WITH HOT GLUE, RUN UNDER COLD
WATER IMMEDIATELY.
WARNING! DO NOT ALLOW HOT GLUE TO COME
INTO CONTACT WITH THE PRODUCT HOUSING
DURING USE.
Installing A Different Nozzle
The nozzles on this glue gun can be changed to better suit the task at hand.
1. Remove the rubber nozzle cover by pulling it off the glue gun.
Note: The nozzle cover may be difcult to remove after the glue gun has
been used. The spanner may be used to help remove it.
2. Unscrew the nozzle by turning it anti-clockwise with the 13mm spanner.
Note: Inspect the rubber O-ring on the nozzle for damage before tting it.
If the O-ring is worn, replace it before continuing to use the nozzle.
3. Fit the desired nozzle onto the end of the glue gun and tighten it by
turning it clockwise.
4. Fit the nozzle cover back onto the new nozzle.
2. CHANGING NOZZLES 3. LOADING GLUE STICKS
a.
b.
WARNING! ENSURE THE TOOL IS SWITCHED OFF,
THE BATTERY IS REMOVED & THE TOOL HAS
COOLED DOWN BEFORE PERFORMING ANY OF THE
FOLLOWING TASKS.
Produktspezifikationen
| Marke: | Ozito |
| Kategorie: | Nicht kategorisiert |
| Modell: | PXGGS-011 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito PXGGS-011 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Ozito
1 August 2025
27 Juli 2025
6 Juli 2025
3 Oktober 2024
2 Oktober 2024
21 September 2024
19 September 2024
15 September 2024
28 August 2024
27 August 2024
Bedienungsanleitung Nicht kategorisiert
- Kensington
- Aqua Medic
- Quik Lok
- Morec
- AVID
- Eurochron
- Kinderkraft
- H-Tronic
- Tenda
- Zoofari
- NZR
- EMG
- Lotus
- Vevor
- DMG Lumière
Neueste Bedienungsanleitung für -Kategorien-
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
