PAC LPHHY06 Bedienungsanleitung

Lies die bedienungsanleitung für PAC LPHHY06 (9 Seiten) kostenlos online; sie gehört zur Kategorie car kit. Dieses Handbuch wurde von 11 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 5 Bewertungen. Hast du eine Frage zu PAC LPHHY06 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

© 2021 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.

PAC-audio.com

Pacific Accessory Corporation

Rev.8

8/19/2022

LPH Harness Instruction Guide

®

Wiring Connection Chart (All Models)

All LPH harnesses are designed to work on OEM Non-Amplied systems.

All LPH harnesses are designed to be modular and used in various applications. (Listed Below)

-Adding Multi-Channel Ampliers Front -LPH-SPK(A) / (C)

-Adding Multi-Channel Ampliers Rear -LPH-SPK(B) / (D)

-Adding Multi-Channel Ampliers Front / Rear -LPH-SPK(A) / (B) / (C) / (D)

-Adding Mono Amplier Standalone Subwoofer -LPH-SPK(E)

-Provides Power/Ground/ACC -LPH-SPK(F)

-Provides speaker inputs / outputs on all channels

If no powered accessories are going to be installed behind your radio you will not need to use the LPH-SPK(F) pigtail. If you are

using this harness make sure your loose ends are connected prior to plugging in to the main LPH harness. If not connected to a

device or insulated this could cause a short circuit.

LPH-SPK (A)LPH-SPK (B)LPH-SPK (C)

Front - Signal from AMPRear - Signal from AMPFront - Signal to AMP

Wire ColorFunconWire ColorFunconWire ColorFuncon

WhiteFront Le (+)GreenRear Le (+)WhiteFront Le (+)

White/BlackFront Le (-)Green/BlackRear Le (-)White/BlackFront Le (-)

GrayFront Right (+)VioletRear Right (+)GrayFront Right (+)

Gray/BlackFront Right (-)Violet/BlackRear Right (-)Gray/BlackFront Right (-)

LPH-SPK (D)LPH-SPK (E)LPH-SPK (F)

Rear - Signal to AMPSignal to AMP (SUB-T)Power Extension

Wire ColorFunconWire ColorFunconWire ColorFuncon

GreenRear Le (+)BlueLe (+)YellowConstant 12V

Green/BlackRear Le (-)Blue/BlackLe (-)RedAccessory

VioletRear Right (+)RedRight (+)BlackGround

Violet/BlackRear Right (-)Red/BlackRight (-)

LPH-SPK (E) Can be use in both front or rear conguraons based on user preference.

LPH-SPK (F) Not all vehicles will provide accessory signal (Red Wire).

Important Notes

Example Installation - Mono Amplier - LPH-SPK(E)

OEM RADIO HARNESS

LPH TO RADIO CONNECTION

For this application you will want to split

either the front or rear channels on the

main LPH harness and insert (LPH-SPK(E))

in between. (See Photo).

This will provide a High-Level output for

various devices such as an Amplier, DSP,

or LOC that can accept a high-level input

signal.

LPH-SPK(F) can be used to provide Power,

Ground, and in some cases Acc for your

audio adapter (See Photo Bottom Right).

You will want to test your vehicles factory

speaker signal to verify that low level

frequencies are present.

This example will also maintain your

factory speaker connection as it is

bypassed though the harness.

LPH-SPK(F)

Produktspezifikationen