PAC RP4-AD11 Bedienungsanleitung

Lies die bedienungsanleitung für PAC RP4-AD11 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 5 Bewertungen. Hast du eine Frage zu PAC RP4-AD11 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Pacic Accessory Corporation

® | Santa Ana, California 92705 | Ph. 866-931-8021 | support@pac-audio.com

©2011 Pacic Accessory Corporation

www.pac-audio.com

C

RP4-AD11

Radio Replacement & Steering Wheel Control Interface

for Audi Vehicles

Rev. 011312

Introduction & Features

Important Notes

Wiring Connection Chart

Illustration / Schematic

The RP4-AD11 interface allows the replacement of a factory radio in select Audi vehicles with LSFT-CAN databus radios.

Using this interface will retain factory features such as steering wheel controls (SWC) and the factory audio amplier

whenever the original radio is removed. The RP4-AD11 also provides data bus driven outputs such as retained accessory

power (RAP), vehicle speed sensor (VSS), illumination, reverse trigger and parking brake.

1. The radio select rotary switch on the side of the interface must be adjusted to the proper radio setting before plugging the

interface into the vehicle (see next page for setting chart).

2. The interface comes pre-programmed for all of the vehicles factory SWC functions and does not require programming unless

you wish to re-assign the SWC functions to different buttons. The SWC can always be restored to default settings by pressing

and releasing the program button on the side of the interface once and waiting 7 seconds for the LED to ash 4 times.

3. The LED will ash whenever a SWC button is pressed.

Red / WhiteP.B. Output (-)

Purple / WhiteVSS Output

RedAcc. Output (1 amp)

Orange / WhiteIllum. Output (+)

GreenReverse Output (+)

Interface Connector

YellowBattery +12v

Black Ground

Blue/WhiteAmp Turn On Input

WhiteFront L + input

White / BlackFront L - input

GreyFront R + input

Grey / BlackFront R - input

GreenRear L + input

Green / BlackRear L - input

PurpleRear R + input

Purple / BlackRear R - input

Vehicle Connector

SWC Connector

Blu/YelKenwwod, Newer

JVC, OEM or

Blaupunkt

3.5mm JackAlpine, JVC,

Clarion, Pioneer,

Sony, Valor, Boyo,

Dual, Visteon or

Advent

Accessory Output

+12volts 1amp max.

Interface Connector

See above chart for

wire color descriptions.

Vehicle Connector

See above chart for

wire color description.

SWC Connection

See above chart for

different radio type

connections

Wiring

SWC Connection

Page 1

Produktspezifikationen