PAC RPA-VA1 Bedienungsanleitung

Lies die bedienungsanleitung für PAC RPA-VA1 (1 Seiten) kostenlos online; sie gehört zur Kategorie Schalter. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 7 Bewertungen. Hast du eine Frage zu PAC RPA-VA1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.

PAC-audio.com

C

Rev: V3

Date: 060719Page 1

Di󰀨erential to Single Ended

Video Converter / Video Noise Filter

RPA-VA1

The RPA-VA1 is a di󰀨erential to single ended video converter. It is designed for use when installing an aftermarket

radio into a vehicle that uses a di󰀨erential camera. The RPA-VA1 can also be used as a video noise lter in cases

where the camera ground is on a di󰀨erent plane than the aftermarket radio, by eliminating the ground loop and xing

distortion such as horizontal lines in the video.

Introduction & Features

Important Notes

1. It is very important that you connect the RPA-VA1 ground wire to the aftermarket radio's ground wire. These two

components sharing the same ground is critical to the noise lter feature.

2. The video input connector has 2 independent wires for when you are connecting to a factory reverse camera. The RCA

end can be cut o󰀨 and the harness wires connected directly to the vehicle.

Wiring Connection Chart

Black (Ground -)

Red (Acc 12v+)

Video In

Yellow (Video +)

Black (Video -)

Video Out

RPA-VA1

Produktspezifikationen