PAC WRI-P Bedienungsanleitung


Lies die bedienungsanleitung für PAC WRI-P (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 38 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 19.5 Bewertungen. Hast du eine Frage zu PAC WRI-P oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
1
11-17-09
WRI-P
Wired Remote Input Control Interface
Before You Start
A. Prepare for the installation.
• If possible, install the WRI-P while you are installing the new head unit.
• Plan a general installation location for both the WRI-P infrared eye and the control body.
• If you are installing the WRI-P in conjunction with a SWI-PS, please refer to the SWI-PS instructions for all wiring
Pacific Accessory Corporation
IP-BUS input
Antenna jack
Power
To Infrared Eye
Fuse
Jack for the SWI-PS
IP-BUS cable
WRI-P
Installation Instructions
Compatible with Pioneer in-dash
navigation units that lack an IR receiver
but have a wired remote input.
Wiring Connections
Step 1.
Connect the BLACK
wire to ground (-).
Verication: Wire
or location registers
a constant (-) when
probed.
Step 2.
Connect the RED wire
to switched +12V.
Verication: Wire reg-
isters +12V when the
ignition key is turned
to the ACC or ON posi-
tions.
WRI-P
Black
Red
WRI-P
Black
Red 12V+ (Switched)


Produktspezifikationen

Marke: PAC
Kategorie: Nicht kategorisiert
Modell: WRI-P

Brauchst du Hilfe?

Wenn Sie Hilfe mit PAC WRI-P benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten