Panasonic PT-RQ22K Bedienungsanleitung

Lies die bedienungsanleitung für Panasonic PT-RQ22K (64 Seiten) kostenlos online; sie gehört zur Kategorie Beamer. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 13.5 Bewertungen. Hast du eine Frage zu Panasonic PT-RQ22K oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Specications

Main unit

Power supply

AC 200V-240V, 8.5A, 50/60Hz

The light output will decrease to approximately 1/2 when using the projector with

AC 100V to AC 120V [9.8A].

Power consumption

1,650 W (1,690 VA [AC200V]) (0.3 W with Standby Mode set to Eco*

1

,

4 W with Standby Mode set to Normal)

1,140W (Normal Mode), 1,380 W (Eco Mode)

Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297ft),

IEC627087: 2008 Broadcast contents, Picture mode: Standard, Dynamic contrast [2]

BTU value

Max 5,364 BTU

DLP™ chip Panel size 22.9 mm (0.9 inches) diagonal (16:10 aspect ratio)

Display method DLP™ chip × 3, DLP™ projection system

Pixels 4,096,000 (2560 ×1600) ×3, total of 12,288,000 pixels

49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON

Refresh rate 240 Hz*

2

Lens Optional (no lens included with this model)

Light source Laser Diode (Laser class: Class 1)*Class 3R for North America/China.

Illumination life of set Varies depending on operation mode setting.

20,000 hours at half luminance (Normal) 24,000 hours at half luminance (Eco)

* IEC62087: 2008 Broadcast contents, Dynamic contrast [3]

(NORMAL/ECO Temperature: 30°C (86°F), Altitude 700m (2,297 ft),Dynamic

Contrast [3] Under conditions of 0.15 mg/m

3

of particulate matter

Screen size (diagonal) 1.78–25.4 m (70–1,000 in) with 16:10 aspect ratio

1.78–15.24 m (70–600 in) with the ET-D75LE8/ET-D3LET80, 16:10 aspect ratio

3.05–15.24 m (120–600 in) with the ET-D75LE95, 16:10 aspect ratio

Brightness*

4

21,000 lm (Center)*

3

*

5

/ 20,000 lm

Center-to-corner uniformity

90 %

Contrast*

4

20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)

Resolution 5120 ×3200 pixels when Quad Pixel Drive set to ON

Scanning frequency SDI signal input SD-SDI signal

HD-SDI signal

3G-SDI signal

DIGITAL LINK signal input

• Moving image signal resolution: 480/60i*

6

, 576/50i*

6

to 4096 x 2160

Still image signal resolution: 640 x 400 to 3840 x 2400 (non-interlace)

• Dot clock frequency: 25 MHz to 297 MHz

HDMI signal input

This is supported when the optional Interface Board for HDMI 2 input (Model No.: ET-MDNHM10) is installed in the slot.

• Moving image signal resolution: 480/60i*

6

, 576/50i*

6

to 4096 x 2160

Still image signal resolution: 640 x 400 to 3840 x 2400 (non-interlace)

• Dot clock frequency: 25 MHz to 594 MHz

DVI-D signal input

This is supported when the optional Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10) is installed in the slot.

• Moving image signal resolution: 480/60i*

6

, 576/50i*

6

to 2048 x 1080

Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)

• Dot clock frequency: 25 MHz to 162 MHz

Lens shift Vertical (from center of screen) ±59 % (±56 % with ET-D75LE6/ET-D3LEW60, +69 % – +84 %

with ET-D75LE95) (powered)

Horizontal (from center of screen)

±29 % (±19 % with ET-D75LE6/ET-D3LEW60, ±21 %

with ET-D75LE95) (powered)

NOTE: Optical axis shift function cannot be operated when used with the ET-D3LEW50.

PT-RQ22K

3-Chip DLP™ Projector

As of July 20181/30

RQ22KG_SYK_01_27/07/2018

Produktspezifikationen