Panduit CUCFS10B1 Bedienungsanleitung


Lies die bedienungsanleitung für Panduit CUCFS10B1 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Panduit CUCFS10B1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
V00029EJ
NET-CONTAIN UAC FLOOR SEAL
Page 1 of 2
CUCFS06B1
(1) 600mm Floor Seal
Component Guide
CUCFS07B1
(1) 700mm Floor Seal
CUCFS08B1
(1) 800mm Floor Seal
CUCFS10B1
(1) 1000mm Floor Seal
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
V00029EJ
Page 2 of 2
Installation-Adhesive Attached to Cabinet
*Clean surface before applying adhesive.
1). Remove protective backing from adhesive strip.
2). Place adhesive neatly on flat surface across bottom face of the
cabinet.
3). The free end of the flap may be tucked inward or left out.
Floor Seal Locations
Cabinet
Floor Seal
Adhesive
Floor Seal Locations
Placement-Cold Aisle Containment Placement-Hot Aisle Containment
Floor Seal Locations
Installation-Adhesive Attached to Floor
*Clean surface before applying adhesive.
1). Remove protective backing from adhesive strip.
2). Place adhesive neatly on floor to align with the bottom face of the
cabinet.
3). The free end of the flap must be tucked inward under the cabinet.
Adhesive
(attached to
floor)
Floor Seal
Cabinet


Produktspezifikationen

Marke: Panduit
Kategorie: Nicht kategorisiert
Modell: CUCFS10B1
Breite: 998 mm
Produktfarbe: Schwarz
Höhe: 89.1 mm
Menge pro Packung: 1 Stück(e)
Nachhaltigkeitszertifikate: RoHS

Brauchst du Hilfe?

Wenn Sie Hilfe mit Panduit CUCFS10B1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten