Panduit PED8B1 Bedienungsanleitung

Lies die bedienungsanleitung für Panduit PED8B1 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 15.5 Bewertungen. Hast du eine Frage zu Panduit PED8B1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp

INSTRUCTIONS CM592A

© Panduit Corp. 2014

Door

Part NumberSingle SidedDual Sided

PED6B1 PEVF6PEV6

PED8B1 PEVF8PEV8

PED10B1 PEVF10PEV10

PED12B1 PEVF12PEV12

Corresponding Vertical Manager

Page 1 of 5

PatchRunnerTMHigh Capacity Vertical Doors

Part Numbers: PED6B1, PED8B1, PED10B1, PED12B1, PED696B1, PED896B1,

PED1096B1, PED1296B1

Installation Instructions-Mounting Door to PEV Manager-

Step 3: Ensure that both handles are in the

disengaged position.

Handles

disengaged

Step 4: Set door onto ends of door bracket located

on the bottom of the manager. Then ensure that

activation tabs on the door bracket fit into windows

on the door.

Activation Tabs

Windows on door

Step 5: Fit activation tabs located on the top door

bracket into the windows located on top of the door.

Activation Tabs

Windows on door

Handles engaged

Step 6: Grasp fingers of manager with fingers and

apply thumb to door face. Then squeeze together

until handles pop into engaged position.

Step 1: Using a flat object, remove the grommets

from the rear of the door. The door brackets can

now be installed.

Door brackets

Remove grommets

Bottom of manager

Top of manager#12-24 Screws

Step 2: Install door brackets to manager as shown

using #12-24 screws Tighten screws to 15 in-lbs.

7FT Sizes

Produktspezifikationen