Panduit POEXRX4 Bedienungsanleitung

Lies die bedienungsanleitung für Panduit POEXRX4 (4 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 17 Bewertungen. Hast du eine Frage zu Panduit POEXRX4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

© Panduit Corp. 2018PN636

Page 1 of 4

PoE Extenders

Part Number(s): POEXTX1, POEXRX1, POEXRX4, POEXKIT1, POEXKIT4

Installation Steps for Extender Kits

4 IP

Devices

Switch

Local Power Option

Data and Power Over 4-Pair UTP up

to 2,000ft (610m)

Local Power Option

Product Details (POEXTX1)

•Paired with POEXRX1 or POEXRX4

•Up to 50W PoE

•Need to be locally powered when non-PoE switch is used

•IEEE compliant

Product Details (POEXRX4)

•Paired with POEXTX1

•1 uplink port & 4 downlink ports

•Max 30W per downlink port

•Supports IEEE compliant devices

•Can be locally powered for additional PoE delivery

4-Port PoE Extender Kit (POEXRX4 + POEXTX1 + 110W, 55V Power Supply)

Product Details (POEXTX1)

•Paired with POEXRX1 or POEXRX4

•Up to 50W PoE

•Need to be locally powered when non-PoE switch is used

•IEEE compliant

Product Details (POEXRX1)

•Paired with POEXTX1

•Up to 50W PoE

•PoE on 4 pairs

•IEEE compliant

•Can be locally powered for additional PoE delivery

Data and Power Over 4-Pair UTP up

to 2,000ft (610m)

IP DeviceSwitch

Local Power Option

Local Power Option

•Remove the PoE Extender transmitter (POEXTX1) and receiver (POEXRX1 or POEXRX4)

from their packaging.

•Ensure your cable is properly terminated before connecting to any PoE Extender product.

•Connect the transmitter (POEXTX1) port marked "TO SWITCH" to a port on the switch.

•Connect the Category 5e or higher (Category 6 recommended) copper cable from the

transmitter (POEXTX1) portmarked "TO RX" to the receiver (POEXRX1 or POEXRX4) port

marked "TO TX".

Bandwidth Availability

100Mbps full duplex, symmetrical to 2,000 feet (610m) over 4-Pair UTP Copper Cable

1-Port PoE Extender Kit (POEXRX1 + POEXTX1 + 60W, 55V Power Supply)

•Using a copper cable or patch cord, connect the IP devices to the receiver (POEXRX1 or POEXRX4) port marked "TO IP

DEVICE"

•If using the local power option (supplied with POEXKIT1 or POrd from the car-EXKIT4), remove the power supply and co

ton.

1. Plug the DC barrel connector of the power supply into the PoE Extender box to be locally powered. The 110Wis

recommendedfor POEXRX4; the 60W supply can power either the POEXTX1 or POEXRX1.

2.Plug the AC power cord, into the power supply and then into a local AC, grounded outlet.

3. If the PoE receiver is locally powered and the PoE transmitter is not, the port on the switch or device the PoE

transmitter is connected to must be PoE capable.

Produktspezifikationen