PCE Instruments PCE-444 Bedienungsanleitung
PCE Instruments
Messgeräte
PCE-444
Lies die bedienungsanleitung für PCE Instruments PCE-444 (2 Seiten) kostenlos online; sie gehört zur Kategorie Messgeräte. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 14 Bewertungen. Hast du eine Frage zu PCE Instruments PCE-444 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
Manual
Environmental Tester
PCE-444
1 Safety .
Read the following safety information carefully before attempting to operate or service the meter.
Use the meter only as specied in this manual; otherwise, the protection provided by the meter
may be impaired.
▲ ： Environment conditions
1 90RH Non-condensation ． RH ≤ ％（ ）
2 Operating temperature:- /-4 ． 20℃～60℃ ℉～140℉
▲ Maintenance
1 Repairs or servicing not covered in this manual should only be performed by ．
qualied personnel.
2 Wipe the unit with a dry soft cloth periodically. Do not use abrasives or solvents ．
on this instrument.
▲ ： Safety symbol
Comply with EMC
2 Introduction .
The Humidity & Temperature Meter is designed with a high accuracy humidity &
temperature sensor, providing high accuracy, fast response and stable readings. It is widely used
for monitoring and collecting data of environment temperature and humidity. This meter is widely
used for measurement of temperature and humidity of room, metro, library, commercial center,
communication center room, etc.
3 Features.
➢ Imported high accuracy humidity &temperature sensor ,high accuracy, fast response
➢ Color LCD display with backlight
➢ Temperature unit selection / ：℃ ℉
➢ MAX/MIN
➢ HOLD
➢ Dew point temperature
➢ Wet bulb temperature
➢ Enable/Disable auto power o
➢ Over range indication
➢ Low battery indication
4. Basic Operation
1. Open battery cover and install 3*1.5V AAA batteries in the battery compartment.
2.Power on: press“ ”to power on，the meter conducts self-inspection, after LCD displays, it
measures temperature and humidity automatically.
3.After testing ，press“ ”to turn off the meter.
Note: Remove the battery when the meter is to be stored for long periods of time to avoid battery
leakage.
5 Specication .
Humidity
Range 0 100%RH ： ～
Range
Accuracy
Resolution
45～75RH%
±3.0 RH%
0.1
Others
±4.5 RH%
Temperature
Range
Accuracy
Resolution
- /-4 20℃～70℃ ℉～158℉
±1.0 /±1.8 ℃ ℉
0.1
Dew point temp.
20 70℃～℃ ℉ ℉ /-4 ～158
±1.5 /±2.7 ℃ ℉
0.1
Remark: Accuracy is based on environment condition of ; 25℃
40 RH% 100 RH% ～
Wet bulb temp.
20 70℃～℃/ -4 158 ℉～℉
±1.5 /±2.7 ℃ ℉
0.1
Data update
0.5S
Enable/disable
auto power o
The meter shuts o automatically after 15 minutes inactivity under auto
power o mode, disable auto power o is available
Operating conditions
- /-4 ,10 RH% RH% 20℃～60℃ ℉～140℉ ～90
Storage conditions
- /-4 ,10 RH% RH% 20℃～60℃ ℉～140℉ ～75
Power supply
3*1.5V “AAA” batteries
Battery life
at least 50 hours
Dimensions
168*56*30.5 mm
Weight
75g
6 Meter description .
①. Temperature and humidity sensor
②. Color LCD display
③. Hold button
④. Power on/o button
⑤. MAX/MIN button
⑥. Mode selection button
⑦. Battery cover
⑧. Nameplate
7 LCD display description .
①. Data hold Icon
②. Auto power o Icon
③. Temperature reading
④. Dew point temperature units icon
⑤. Wet bulb temperature units icon
⑥. Humidity reading
⑦. Humidity unit icon
⑧. Temperature unit icon
⑨. low battery Icon
⑩. MAX/MIN
8 Operation instruction .
8.1 power on/o；
；
；
；；press“ ”to turn on/off the meter.
8.2 In the measuring mode Data hold; ， ，press“ ” “HOLD”Icon will appear on the
LCD which indicates the data is freezed. To release the held reading， ，press“ ”again.
8.3 ; In the measuring mode MAX/MIN ，press“ ”， “MAX”will appear on the LCD，
the captured maximum readings will be displayed on the LCD, press“ ”again “MIN”will ，
appear on the LCD and the captured minimum readings will be displayed on the LCD. Long
press“ ”，the meter exit MAX/MIN measurement mode and back to normal measuring mode.
8.4 with the meter on it can select temperature, dew point key；
；
；
；； ， ，press“ ”
temperature and wet bulb temperature in turn.
8.5 Use of compound key
；
；
；
；；
8.5.1 With the meter o ter， ，press“ ”first and hold then press“ ”to power on the me ，
it can change temperature unit(°C/°F) is preset. ，℃
8.5.2 With the meter o，press “ ”first and hold，then press“ ”to power on the meter，
“ ”icon on the LCD display disappear, which indicates the power off functions is disabled. You
need to turn off the meter through pressing “ ”by manual.
Note: icon displayed on the screen, it indicates that the meter will automatically turn When“ ”
o after approx. 15 minutes of inactivity.
9 Notes .
1． This meter has already been calibrated before delivery. Do not revise the calibration parameters
without professional personnel and device.
【 】Note The unit has been calibrated before delivery. The recommended calibration period is
one year.
2 Repairs or servicing not covered in this manual should only be performed by qualied ．
personnel.
3 Wipe the unit with a dry soft cloth periodically. Do not use abrasives or solvent on this ．
instrument.
4 Remove the battery when the meter is to be stored for long periods of time to avoid battery ．
leakage.
5 ．When the battery is low.LCD display “ ”, a new battery is needed.
10. Accessories
1．User’s manual
2 1.5V AAA Battery．
Produktspezifikationen
| Marke: | PCE Instruments |
| Kategorie: | Messgeräte |
| Modell: | PCE-444 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit PCE Instruments PCE-444 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Messgeräte PCE Instruments
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Bedienungsanleitung Messgeräte
- Testo
- Pyle
- Reely
- Skandia
- Greisinger
- Voltcraft
- Hama
- Multimetrix
- Hazet
- Enda
- Sekonic
- Nieaf-Smitt
- Weltron
- HOZO Design
- Water-i.d.
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024