PDP REALMz Wireless Plus Controller Bedienungsanleitung
PDP
Nicht kategorisiert
REALMz Wireless Plus Controller
Lies die bedienungsanleitung für PDP REALMz Wireless Plus Controller (22 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2 Bewertungen. Hast du eine Frage zu PDP REALMz Wireless Plus Controller oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/22
English
NOTICE: Before using the controller, we recommend fully charging it as it will only have an hour or two of battery life out of the
box.
1.
Pairing
the
Controller
A.
Turn
on
your
Nintendo
Switch™
device
and
press
any
button
on
the
controller.
B.
If your controller does not automatically connect, it will need to be paired with the device.
C.
Using
the
Joy-Con™
controllers,
navigate
to
Controllers
>
Change
Grip/Order.
D.
Now, using your controller, press and hold the sync button (at the top of the controller by the charging port) for
3 seconds until it pairs and the player indicator light at the bottom is solid.
Tip: To unpair the controller from the Nintendo Switch, hold down the sync button (located at the top of the
controller) for at least 1 second.
2.
Re-connecting
the
Controller
A.
If the controller is not connecting with the device, but has already been paired, simply go into
Controllers >
Change Grip/Order.
B.
When
prompted,
press
L
and
R
on
your
controller
to
connect.
Tip
:
You
can
also
press
and
hold
the
“Home” button to
wake
up
the
controller
and
Nintendo
Switch™ device.
3.
Charging the Controller
A.
When the controller is low on battery, the “function” button’s LED (located at the center of the controller
between
the
+
and
–
buttons)
will
blink
RED
every
30
seconds.
B.
Using
the
included
USB-C
cable,
connect
the
controller
to
one
of
the
USB
ports
on
the
Nintendo Switch
dock.
C.
While
charging,
the
“function”
button’s
LED
will
pulse
RED.
When
the
controller
is
fully
charged,
the
LED
will
turn WHITE.
Note:
To
prevent
the
controller
battery
from
completely
draining
out,
please
charge
the
controller
every
3
months
even if it’s not in use.
D.
The REALMz Wireless Controller comes with a 1 ft. USB-C charging cable. To play while charging, longer USB-C
cables are available for purchase on pdp.com.
4.
Change
LED
Lighting
Modes
A.
The
REALMz™
Wireless
Controller
comes
with
four
different
lighting
effects
pre-programmed
to
the
controller’s
A, B, X, and Y buttons.
B.
To
explore
these
effects
and
cycle
through
them,
hold
the
“function”
button
and
press
either
A,
B,
X,
or
Y.
Produktspezifikationen
| Marke: | PDP |
| Kategorie: | Nicht kategorisiert |
| Modell: | REALMz Wireless Plus Controller |
Brauchst du Hilfe?
Wenn Sie Hilfe mit PDP REALMz Wireless Plus Controller benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert PDP
11 August 2025
11 August 2025
10 August 2025
10 August 2025
10 August 2025
10 August 2025
10 August 2025
10 August 2025
1 August 2025
31 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Intermec
- Franken
- JWIN
- Kopykake
- Britax-Römer
- A4Tech
- Valeo
- Infantino
- Speaka
- EtherWAN
- DutchOne
- Broan
- White Lightning
- Code Mercenaries
- Kino Flo
Neueste Bedienungsanleitung für -Kategorien-
11 August 2025
11 August 2025
11 August 2025
11 August 2025
11 August 2025
11 August 2025
11 August 2025
11 August 2025
11 August 2025
11 August 2025