Peavey Impulse 1012 Bedienungsanleitung

Peavey Lautsprecher Impulse 1012

Lies die bedienungsanleitung für Peavey Impulse 1012 (8 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 11 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 6 Bewertungen. Hast du eine Frage zu Peavey Impulse 1012 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
www.peavey.com
Impulse® 1012
Product
Specications
Specications - Peavey® Impulse® 1012
Frequency Response: 67 Hz to 18 kHz, 1 meter on axis, swept sine in anechoic environment
Usable Low Frequency limit (-10 dB point anechoic): 55 Hz
Nominal sensitivity (1W @1M, swept sine input in anechoic environment):
96 dB (average)
Maximum Sound Pressure Level (1 meter):
123 dB continuous
129 dB SPL peak with music
Radiation Angle measured at -6 dB point of polar response:
Nominal: 110 degrees horizontal X 80 degrees vertical
(Axis of the vertical main polar lobe is angled down 10 degrees, resulting in the angular pattern with respect to
straight ahead being +30, -50 degrees)
Transducer Complement:
Low Frequency Section:
1 X 12” woofer, vented
Black Widow® 1208-8 BMX WR SS SF (03617970)
High Frequency Section:
1 X 1.0” exit, 50 mm voice coil
RX™22N Neodymium compression driver on asymmetrical Quadratic roat CD Horn
Box Tuning Frequency: 51 Hz
Electro-acoustic crossover frequency: 2 kHz
Crossover type:
Internal passive two-way crossover with driver EQ, and driver level matching incorporated.
Crossover Slopes:
12 dB/octave (2nd order) each driver, both with staggered poles and driver EQ.
Impedance (Z) in ohms (Ω):
Nominal: 8.0 Ω
Minimum: 5.1 Ω
Input Connections:
Two NL-4 twist-lock jacks in parallel with a 4 position screw terminal barrier strip.
Enclosure Materials & Finish:
Black polypropylene plastic with textured surface, black powder-coated perforated full-coverage grille.
Mounting provisions:
Four rubber feet provide vibration free oor or stage use, and a molded-in stand mounting cup is on the bottom
for use with 1 3/8” stand poles. Unit has two four insert mounting groups (8 inserts total) of M6 metric inserts,
for use with the Peavey VM 70 mounting bracket, one on the le side, and one on top.
Overall Dimensions ( H x W x D )
25.3”H x 14.38”W x 14.00”D
643 mm x 366 mm x 356 mm
Net Weight: 45 lbs. (20.4 kg)
Features
2-way full range sound reinforcement system
Black Widow® 12” 1208-8 BWX WR SS SF long-throw woofer
RX™22N Neodymium compression driver
Power Handling: 2000 watts peak, 1000 watts Program
HF Driver protected by Sound Guard™ III
Patented Quadratic roat Waveguide™ technology, 110 by 80 degree coverage
Rugged plastic injection-molded trapezoidal enclosure
Cabinet has dual rear corner angled sides for oor monitor use.
Full-coverage perforated steel grille, with powder coat nish
Pole mount molded-in for 1 3/8” diameter poles
M6 metric y points for VM-70, top and le side of cabinet
Weather-resistant for sheltered outdoor use.
Overall system weatherization rating of IP44
WARNING! e Impulse®1012 is very ecient and powerful! is sound system can permanently damage hear-
ing! Use extreme care setting the overall maximum loudness!
e apparent sound level of the Impulse®1012 can be deceiving due to its clear, clean sound output. e lack of
distortion or obvious distress can make the sound level seem much lower than it actually is. is system is capa-
ble of SPL in excess of 129 dB at 1 M from the speaker!


Produktspezifikationen

Marke: Peavey
Kategorie: Lautsprecher
Modell: Impulse 1012

Brauchst du Hilfe?

Wenn Sie Hilfe mit Peavey Impulse 1012 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten