Philips AX2401 Bedienungsanleitung

Philips Nicht kategorisiert AX2401

Lies die bedienungsanleitung für Philips AX2401 (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Philips AX2401 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/5

QUICK START MISE EN SERVICE RAPIDE

open

CLASS 1

LASER PRODUCT

Meet Philips at the Internet

http://www.philips.com

OPEN

HOLD

➟

OFF

PLAY 2;

7VOL

!!!

user manual

manuel d’utilisation

manual del usario

Manual do usuário

AX2400, AX2401, AX2420

Portable CD Player AX2400

AX2401

AX2420

English CONTROLS / POWER SUPPLY

12; ......................switches the player on, starts or pauses CD play

2............................display

39.........................stops CD play, clears a program or switches the player off

∞.......................skips and searches CD tracks backwards

§.......................skips and searches CD tracks forwards

4DBB.....................switches the bass enhancement on and off. This button also

switches acoustic feedback (the beep) on/off when it is

pressed for more than 2 seconds

5PROG...................programs tracks and reviews the program

6MODE/ESP..........selects the different playing possibilities:

SHUFFLE,

SHUFFLE REPEAT ALL, REPEAT, REPEAT ALL and SCAN,

switch ESP on/off

7VOLUME

+/-

......adjust the volume

8p/LINE OUT........3.5 mm headphone socket, socket to connect the player to

another audio input of an additional appliance.

9OPEN ç............opens the CD lid

0HOLD...................locks all buttons

RESUME .............stores the last position of a CD track played

OFF......................switches RESUME and HOLD off

!4.5V DC...............socket for external power supply

@............................type plate

ONTROLS ( see figure

)

POWER SUPPLY / GENERAL INFORMATION

Use only the AY 3162 adapter (4.5 V / 300 mA direct

current, positive pole to the center pin). Any other product

may damage the player.

1Make sure the local voltage corresponds to the power

adapter’s voltage.

2Connect the power adapter to the 4.5V DC socket of

the player and to the wall socket.

Note: Always disconnect the adapter when you are not using it.

Environmental information

• All redundant packing material has been omitted. We have done our utmost to

make the packaging easily separable into two materials: cardboard (box) and

polyethylene (bags, protective foam sheet).

• Your set consists of materials which can be recycled if disassembled by a

specialized company. Please observe the local regulations regarding the

disposal of packing materials, exhausted batteries and old equipment.

Mains adapter (supplied or optionally available)

You can use the following batteries with this CD-player:

• normal batteries type LR6, UM3 or AA (preferably Philips), or

• alkaline batteries type LR6, UM3 or AA (preferably Philips).

Notes:–

Old and new or different types of batteries should not be combined.

– Remove batteries if they are empty or if the player is not going to be used for

a long time.

Inserting batteries

1Push OPEN çto open the CD lid.

2Open the battery compartment and insert either 2

normal or alkaline batteries.

Battery indication

The approximate power level of your batteries is shown in the display.

Battery full

Battery two-thirds full

Battery one-third full

Battery dead or empty.When the batteries are

dead or empty, the symbol A flashes,

bAtt is displayed, and the beep tone sounds

repeatedly.

Batteries contain chemical substances, so they should be disposed

of properly.

• Do not touch the lens Aof the CD player.

• Do not expose the unit, batteries or CDs to humidity,

rain, sand or excessive heat (caused by heating

equipment or direct sunlight).

• You can clean the CD player with a soft, slightly

dampened, lint-free cloth. Do not use any cleaning

agents as they may have a corrosive effect.

• To clean the CD, wipe it in a straight line from the

center toward the edge using a soft, lint-free cloth. A

cleaning agent may damage the disc! Never write on a CD or attach a sticker

to it.

• The lens may cloud over when the unit is moved suddenly from cold to warm

surroundings. Playing a CD is not possible then. Leave the CD player in a warm

environment until the moisture has evaporated.

• Active mobile phones in the vicinity of the CD player may cause malfunctions.

• Avoid dropping the unit as this may cause damage.

Headphones AY 3806 (AE500 for AX2420 only)

• /Connect the supplied headphones to the pLINE OUT

jack of the player.

Note: p/ LINE OUTcan also be used for connecting

this set to your HiFi system.To adjust the sound

and volume, use the controls on the connected

audio equipment and on the CD player.

IMPORTANT!

Hearing safety: Do not play your headphones at a high volume. Hearing experts

advise that continuous use at high volume can permanently damage your hearing.

Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard

and it is illegal in many countries. Even if your headphones are an open-air type

designed to let you hear outside sounds, do not turn up the volume so high that

you cannot hear what is going on around you.

CD player and CD handling

Batteries (supplied or optionally available)

GENERAL INFORMATION / CD PLAY

Only use the AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage

converter (4.5 V DC, positive pole to the centre pin) and the AY 3501 car adapter

cassette. Any other product may damage the set.

1Put the set on a horizontal, vibration-free and

stable surface. Make sure it is in a safe place,

where the set is neither a danger nor an

obstacle to the driver and the passengers.

2Plug the voltage converter into the

cigarette lighter socket (only for 12 V car

battery, negative grounding), then connect

the wired end with 4.5V DC input socket on the

set.

3If necessary, clean the cigarette lighter socket

to obtain a good electrical contact.

4Turn down the volume and connect the cassette adapter plug to

p/LINE OUT on the set.

5Carefully insert the cassette adapter into the car radio’s cassette compartment.

6Make sure the cord does not hinder your driving.

7Decease the volume on the set, if necessary. Start playback on the set and

adjust the sound with the car radio controls.

•Always remove the voltage converter from the cigarette lighter socket

when the set is not in use.

Note: If your car radio has a LINE IN socket , it is better to use it for the

car radio connection instead of the cassette adapter. Connect the signal

lead to this LINE IN socket and to p/LINE OUT on the set.

4,5 V DC

12 V DC

In-car use (connections supplied or optionally available)

CD PLAY / FEATURES

•If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded

properly, NF dISC is displayed, indicating that the CD has not been

finalized. In that case, use FINALIZE on your CD recorder to complete the

recording.

•When playing a CD-Rewritable (CD-RW), please note that it takes 3–15

seconds after pressing 2; for sound reproduction to start.

•Playback will stop if you open the CD lid.

•While the CD is read, 1 --:-- flashes in the display.

Volume and bass

Volume adjustment

• Adjust the volume by using VOLUME

+/-

on the cd player.

Bass adjustment

• Press DBB to switch the bass enhancement on or

off

yappears if the bass enhancement is

activated.

DBB

Playback information

This CD-player can play all kinds of Audio Discs such

as CD-Recordables and CD-Rewritables. Do not try to

play a CD-ROM, CDi, VCD, DVD or computer CD.

1Push the OPEN çslider to open the player.

2Insert an audio CD, printed side up, by pressing the

CD onto the hub.

3Close the player by pressing the lid down.

4Press 2; to switch the player on and start playback.

yThe current track number and elapsed playing

time are displayed.

• You can pause playback by pressing 2;.

yThe time at which playback was paused starts

flashing.

• You can continue playback by pressing 2; again.

5Press 9 to stop playback.

yThe total number of tracks and the total playing

time of the CD are displayed.

6Press 9 again to switch the player off.

• To remove the CD, hold it by its edge and press the

hub gently while lifting the CD.

Note: If there is no activity, the set will automatically

switch off after a while to save energy.

Playing a CD

Selecting a track during playback

• Briefly press ∞ or §once or several times to skip to

the current, previous or next track.

yPlayback continues with the selected track, and

the track’s number is displayed.

Selecting a track when playback is stopped

1Briefly press ∞ or §once or several times to select

the desired track. The track number is displayed.

2Press 2; to start CD play.

yPlayback starts with the selected track.

Searching for a passage during playback

1Keep ∞ or §pressed to find a particular passage in

a backward or forward direction.

ySearching starts while playback continues at low

volume. After 2 seconds the search speeds up.

2Release the button when you reach the desired passage.

yPlayback continues from this position.

Notes: – If the player is in SCAN mode (see MODE chapter), searching is not

possible.

– In shuffle, shuffle repeat all or repeat mode (see MODE chapter), or

while playing a program, searching is only possible within the

particular track.

Selecting a track and searching

Produktspezifikationen

Marke:	Philips
Kategorie:	Nicht kategorisiert
Modell:	AX2401
Display-Typ:	LCD
Gewicht:	200 g
Akku-/Batterietyp:	AA, LR6, UM3
Lautstärkeregler:	Digital
Gerätetyp:	Tragbarer CD-Player
Energiebedarf:	4.5V
Rauschverhältnis (SNR):	85 dB
Frequenzbereich:	20 - 20000 Hz
Abmessungen (BxTxH):	140 x 140 x 27.5 mm
CD-R-Wiedergabe:	Ja
Verpackungsabmessungen (BxTxH):	243 x 148 x 49 mm
CD-RW-Wiedergabe:	Ja
Audio D/A Konverter:	1-bit
Line-out:	Ja
Weitere Anschlüsse:	DC in (4mm)\nHeadphone (3.5mm)\nLine-out (3.5mm)
Stoßsicherer Speicher:	45 s