Philips Lumea Prestige BRI961 Bedienungsanleitung

Lies die bedienungsanleitung für Philips Lumea Prestige BRI961 (1 Seiten) kostenlos online; sie gehört zur Kategorie Lichthaarentfernungsgerät. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 7 Bewertungen. Hast du eine Frage zu Philips Lumea Prestige BRI961 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1. Unplug the device from the power outlet if you

have used it with the power adapter.

2. Let the device cool down.

3. Moisten the soft cloth supplied with a few drops

of water.

4. Take the attachment o the device.

5. Clean the light exit window of the device (A).

6. Clean all surfaces of the attachment (parts B,

C, D, E), including the metal reector (C) and

transparent lter of the bikini attachment (E).

7.Let all parts dry thoroughly.

8.Store in a dust-free place at room temperature.

DClean & store after treatment

IMPORTANT: First nish section A (Remove hair & clean your skin)

and B (Test skin 24 hrs before treatment).

1. Connect the power adapter to the device and

plug into a power outlet or charge device and

use cordless.

2. Press the on/o button

to turn on the device.

3. Choose the setting you selected after the skin

test (section B, step 9).

4.Press the device rmly onto your skin and hold

it in place. The 'READY light' should light up .white

5. Press the ash button to release a ash on your

skin. The ash treats the skin in that spot.

6. Move the device to the next spot, close to,

but not overlapping the previous spot.

7.Continue until you have treated the full area.

8.Switch o the device when you nish the

treatment.

9. Remove hair before every next treatment,

as long as hair is still visible.

A

D

E

CB

CTreatment

1. Test your skin to nd the correct light setting.

- For every new body area

- After recent tanning

2.Select the correct attachment to test your skin.

There is one for the body (below the neckline),

underarms and bikini area.

The attachments supplied may vary for dierent

products.

3. Press the on/o button

to turn on the device.

4. Choose an area for your skin test.

5. Press the device rmly onto your skin and hold

it in place.

6. Conrm that the 'READY light'white lights up

to ensure that there is full contact with your skin.

- If the 'READY light' is , your skin is too orange

dark to treat. Try Lumea on a lighter body area.

7. Try each setting on your skin if comfortable:

- When the 'READY light' is white, press the ash

button on the handle to treat one spot once

with setting

➀

• You will see a ash of light •

- Move to next area. Treat one spot with setting

➁

- Move to next area. Treat one spot with setting

➂

- Move to next area. Treat one spot with setting

➃

- Move to next area. Treat one spot with setting

➄

8. Wait 24 hours.

9. Check your skin. The highest setting that...

- still felt comfortable and

- did not show a skin reaction

... is the setting to start the treatment with.

1

2

3

4

5

BTest skin 24 hrs before treatment

24 hrs

1. Remove hair before every treatment as long as

hair is still visible.

You can either shave, epilate or wax. If you choose

to wax, wait 24 hours before you use Lumea.

2. Clean and dry your skin. Make sure that it is free

from oily substances.

ARemove hair & clean your skin

Prepare your skin

Quick Reference Card Philips Lumea Prestige

Treat your skin

Note: This Quick Reference Card does not replace the user manual.

Read the user manual carefully before you use Lumea Prestige.

3000.042.8844.1

Produktspezifikationen