
1
2
3
4
6 98
7
5
3600 Series
3500 Series
2
4
3
1
www.philips.com/Sonicare
©2021 Koninklijke Philips N.V. (KPNV). All
rights reserved. Philips and the Philips shield are
trademarks of KPNV. Sonicare and the Sonicare
logo are trademarks of Philips Oral Healthcare,
LLC and/or KPNV.
©2021 Koninklijke Philips N.V. (KPNV). 保留所
有权利。 飞利浦及飞利浦盾牌标志是 KPNV 的商
标。 Sonicare 和 Sonicare 徽标是 Philips Oral
Healthcare, LLC 和/或 KPNV 的商标。
©2021 Koninklijke Philips N.V. (KPNV)。
版權所有。 飛利浦及飛利浦盾牌標誌為 KPNV
的商標。 Sonicare 及 Sonicare
標誌為飛利浦口腔保健公司和/或 KPNV 的商標。
300005813972 (2021-11-16)
1
2
5
8
11 12
3
6
9
4
7
10
English
Introduction
Congratulations on your purchase and welcome
to Philips! To fully benet from the support
that Philips oers, register your product at
www.philips.com/welcome.
Important safety information
Only use the product for its intended purpose. Read
this important information carefully before you use
the product and its batteries and accessories, and save
it for future reference. Misuse can lead to hazards or
serious injuries.
WARNINGS
- Keep the charger and/or UV travel case away from
water.
- After cleaning, make sure the charger and/
or UVtravel case is completely dry before you
connect it to the wall socket.
- This appliance can be used by children and
persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge
if they have been given supervision or instruction
concerning use of the appliance in a safe way and
understand the hazards involved. Cleaning and
user maintenance shall not be made by children
without supervision.
- Children shall not play with the appliance.
- Keep the UV travel case out of the reach of
children at all times.
- Stop using the UV travel case if the UV LED
remains on when the travel case is open. UV light
can be harmful to the human eye and skin.
- Charge only with certied adapters
- USB-C cable should be dried after any contact with
water to prevent oxidation
- Only use original Philips accessories or
consumables. Only use the original USB-C cable
- This appliance contains no user-serviceable
parts. If the appliance is damaged, stop using it
and contact the Consumer Care Center in your
country (see ‚Warranty and support‘). If the cord
is damaged, replace the charger and/or UV travel
case with a new one.
- Do not use the charger and/or UV travel case
outdoors or near heated surfaces.
- Do not clean any part of the product in the
dishwasher.
- This appliance has only been designed for cleaning
teeth, gums and tongue.
- Stop using the appliance and consult your dentist/
doctor if excessive bleeding occurs after use, if
bleeding continues to occur after 1 week of use or
if you experience discomfort or pain.
- If you have had oral or gum surgery in the previous
2 months, consult your dentist before you use this
appliance.
- If you have a pacemaker or other implanted
device, contact your doctor or the manufacturer of
the implanted device prior to use.
- If you have medical concerns, consult your doctor
before you use this appliance.
- This appliance is a personal care device and is not
intended for use on multiple patients in a dental
practice or institution.
- Stop using a brush head with crushed or bent
bristles. Replace the brush head every 3 months or
sooner if signs of wear appear.
- Charge, use and store the product at a
temperature between 32 °F / 0°C and 104 °F /
40°C.
- Keep product and batteries away from re and
do not expose them to direct sunlight or high
temperatures.
- If the product becomes abnormally hot or smelly,
changes color or if charging takes longer than
usual, stop using and charging the product and
contact Philips.
- Do not place products and their batteries in
microwave ovens or on induction cookers.
- Do not open, modify, pierce, damage or dismantle
the product or battery to prevent batteries
from heating up or releasing toxic or hazardous
substances. Do not short-circuit, overcharge or
reverse charge batteries.
- If batteries are damaged or leaking, avoid contact
with the skin or eyes. If this occurs, immediately
rinse well with water and seek medical care.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic elds.
Your Philips Sonicare (Fig. 1)
1 Brush head cap
2 Brush head
3 Handle
4 Power on/o and mode button
5 Brushing modes
6 Battery indicator
7 Charger
8 UV travel case
9 USB-C cable
Note: Appearance may slightly dier, depending on
the model.
Note: The USB-C cable is only compatible for use
with the UV travel case.
Note: Power adapter not included. Only use 5V
IPX4 adapter. It is recommended to use a Philips
adapter; see the Philips website for current
information.
Getting started
Attaching the brush head
1 Align the brush head so the bristles point in the
same direction as the front of the handle.
2 Press the brush head down onto the metal shaft
until there is a small 1-2mm gap. (Fig. 3)
Note: It is normal to see a slight gap between the
brush head and the handle (Fig. 3). This allows the
brush head to vibrate properly.
Charging your Philips Sonicare
1 Place the power toothbrush handle on the charger
(Fig. 4).
2 Connect the charger to a 5V USB wall adapter.
3 Your toothbrush continues to charge until it is fully
charged.
Using your Philips Sonicare
toothbrush
If you are using your Sonicare toothbrush for the
rst time, it is normal to feel more vibration than
when using a non-electric toothbrush. It is common
for rst time users to apply too much pressure. Only
apply gentle pressure and let the toothbrush do the
brushing for you. Please follow brushing instructions
below for the best experience.
Brushing instructions
1 Wet the bristles and apply a small amount of
toothpaste.
2 Place the toothbrush bristles against the teeth at
a slight angle (45 degrees) (Fig. 5), pressing gently
to make the bristles reach the gumline or slightly
beneath the gumline.
Note: Do not turn on the toothbrush until the
brush head is against your teeth.
3 Press the power on/o button to turn on the
Philips Sonicare.
Note: Keep the center of the brush in contact with
the teeth at all times.
4 Gently keep the bristles placed on the teeth and
in the gumline. Brush your teeth with small back
and forth motion so the bristles reach between
the teeth. Continue this motion throughout your
brushing cycle.
Note: The bristles should slightly are. Do not
scrub. It is not recommended to scrub as you
would with a manual toothbrush.
5 To clean the inside surfaces of the front teeth, tilt
the brush handle semi-upright and make several
vertical overlapping brushing strokes on each
tooth (Fig. 6).
Note: To make sure you brush evenly throughout
the mouth, divide your mouth into 4 sections using
the Quadpacer feature (see chapter ‘Features’).
6 Begin brushing in section 1 (outside upper teeth)
and brush for 30 seconds before you move to
section 2 (inside upper teeth). Continue brushing
in section 3 (outside lower teeth) and brush for
30 seconds before you move to section 4 (inside
lower teeth) (Fig. 7).
7 After you have completed the brushing cycle, you
can spend additional time brushing the chewing
surfaces of your teeth and areas where staining
occurs. You can also brush your tongue, with the
toothbrush turned on or o, as you prefer (Fig. 8).
Note: To switch o the power toothbrush, hold
down the power button for 3 seconds or more.
Your Philips Sonicare toothbrush should be safe to
use on braces (brush heads wear out sooner when
used on braces) and dental restorations (llings,
crowns, veneers) if they are properly adhered and not
compromised. If a problem occurs, please follow up
with a dental professional.
Battery status
This Philips Sonicare toothbrush is designed to provide
at least 60 brushing sessions after fully charged for
10 hours, each session lasting 2 minutes. When the
battery is low, the battery indicator starts to ash.
Note: When the battery is completely empty, the
toothbrush switches o. Place the handle on the
charger to charge it.
Note: To keep the battery fully charged at all times,
you may keep your Philips Sonicare toothbrush on
the charger when not in use.
Note: Battery usage time is expected to reduce
over product life time.
Battery status (when handle is charging)
- When the toothbrush is charging, the battery
indicator pulsates green.
- When fully charged, the battery indicator will light
up solid green for 30 seconds before turning o.
Note: It can take up to 10 hours to fully charge the
battery, but you can use the toothbrush before it is
fully charged.
Features
Brushing modes
Your power toothbrush is equipped with three
dierent modes:
Clean
For exceptional everyday clean. (2 minutes).
White
Removes stains on teeth (2 minutes)
Gum care
Gentle cleaning of gums (2 minutes)
Note: When you use the toothbrush for the rst
time, the default mode is ‚clean‘,
To toggle between the brushing modes:
- Press the power button once to turn on the
toothbrush.
- Press a second time within 3 seconds to change
the brushing mode.
- After the toothbrush has been on ve seconds,
if you want to change modes, you‘ll need to turn
the toothbrush o, then on and press the power
button within 3 seconds.
Smartimer
The Smartimer indicates that your brushing cycle is
complete by automatically turning o the toothbrush
at the end of the brushing cycle.
Dental professionals recommend brushing no less
than 2 minutes twice a day.
Quadpacer
The Quadpacer is an interval timer that has a short
pause every 30 seconds to remind you to brush the 4
sections of your mouth evenly and thoroughly (Fig. 7).
UV Cleaning
The UV travel case is equipped with a UV LED. You can
clean your brush head after every use.
Note: UV light can be harmful to the human eye
and skin.
1 After brushing, rinse the brush head and shake o
excess water (Fig. 10).
Warning: Do not place the travel cap on the
brush head during cleaning.
2 Open the UV travel case and place the brush head
in the travel case with the bristles facing the UV
LED (Fig. 11).
Note: Only clean Philips Sonicare snap-on brush
heads in the UV travel case.
3 Insert the USB-C cable into the UV travel case (Fig.
12) and into a 5V USB wall adapter.
Note: The USB-C cable is only compatible for use
with the UV travel case.
4 Close the UV travel case to start the UV clean cycle.
- The UV travel case is in operation when the light
glows through the window.
Note: The UV travel case stops if you open the lid
during the cleaning cycle.
Note: The UV cleaning cycle runs for 10 minutes
and then automatically shuts o.
Cleaning
You should clean your Philips Sonicare toothbrush
regularly to remove toothpaste and other residue.
Failure to clean your Philips Sonicare toothbrush may
result in an unhygienic product and damage to it may
occur.
Warning: Do not clean brush heads, the handle
and the charger in the dishwasher.
Warning: Do not clean with boiling hot water.
Toothbrush handle
1 Remove the brush head and rinse the metal shaft
area with warm water (Fig. 9). Make sure you
remove any residual toothpaste.
Caution: Do not push on the rubber seal on the
metal shaft with sharp objects, as this may cause
damage.
2 Wipe the entire surface of the handle with a damp
cloth.
Note: Do not tap the handle on the sink to remove
excess water.
Brush head
1 Rinse the brush head and bristles after each use
(Fig. 10).
2 Remove the brush head from the handle and rinse
the brush head connection with warm water at
least once a week. Rinse the travel cap as often as
needed.
Charger
1 Unplug the charger before you clean it.
2 Wipe the surface of the charger with a damp cloth.
UV travel case
Warning: Do not immerse the UV travel case in
water or rinse it under the faucet.
Warning: Do not clean the UV travel case in the
dishwasher.
For optimal eectiveness, it is recommended to clean
your UV travel case weekly.
1 Unplug the UV travel case.
2 Remove the handle and brush head from the UV
travel case.
3 Clean the UV travel case with a damp cloth.
4 After cleaning, make sure the UV travel case is
completely dry before you connect it to the USB
adapter.
Storage
If you are not going to use the product for a long
time, unplug it, clean it (see chapter ‚Cleaning‘) and
store it in a cool and dry place away from direct
sunlight.
Replacement
Brush head
Replace Philips Sonicare brush heads every 3 months
to achieve optimal results. Use only Philips Sonicare
Gentle Clean brush heads compatible with Philips
Sonicare 3500 Series or 3600 Series handle.
Troubleshooting
This chapter summarizes the most common problems
you could encounter with the appliance. If you are
unable to solve the problem with the information
below, visit www.philips.com/support for a list of
frequently asked questions or contact the Consumer
Care Center in your country.
Problem Possible cause Solution
I cannot fully
attach the brush
head. There is
a gap between
the brush head
and handle.
This is normal.
A small gap
is necessary
to allow
movement in
order to deliver
the vibrations
needed to clean
your teeth.
My Philips
Sonicare
toothbrush
vibration is less
powerful than
before.
The brush head
is too close to
the body of the
handle.
Remove the
brush head
from the handle
and re-set it on
the metal shaft
leaving small
gap. (1-2mm)
I have charged
my toothbrush,
but it only
works for a
short time.
The toothbrush
handle is not
placed vertically
on the charger,
resulting in no
charge.
Place handle
vertically on
charger base
and make sure
the charger is
plugged in.
Problem Possible cause Solution
The toothbrush
stops working.
The battery is
empty.
Charge the
toothbrush
handle on the
charger.
The UV travel
case is not
working.
Ensure the
cover is closed,
ensure UV
travel case is
connected
to the power
adapter.
Warranty and support
If you need information or support, please visit
www.philips.com/support or read the international
warranty leaet.
Warranty restrictions
The terms of the international warranty do not cover
the following:
- Brush heads.
- Damage caused by use of unauthorized
replacement parts.
- Damage caused by misuse, abuse, neglect,
alterations or unauthorized repair.
- Normal wear and tear, including chips, scratches,
abrasions, discoloration or fading.
Recycling
- This symbol means that electrical products and
batteries shall not be disposed of with normal
household waste.
- Follow your country’s rules for the separate
collection of electrical products and batteries.
Removal of built-in rechargeable battery
The built-in rechargeable battery must be
removed by a qualied professional when the
product is discarded. Instructions for removal of
built-in rechargeable batteries can be found on
www.philips.com/support.
简体中文
说明
感谢您的惠顾,很高兴您选择
飞利浦!为了让您能充分享
受飞利浦提供的支持,请在
www.philips.com/welcome
上注册您的产品。
重要安全信息
仅可将本产品用于预期用途。 使用本产
品及其电池和附件之前,请仔细阅读本
重要信息,并妥善保管以供日后参考。
误用可能会导致危害或严重伤害。
警告
- 确保充电器和/或紫外线旅行收纳盒
远离水源。
- 清洁后,务必确保充电器和/或紫外
线旅行收纳盒完全晾干后,再将其连
接至电源插座。
- 本产品适合由儿童和肢体不健全、感
觉或精神上有障碍或缺乏相关经验和
知识的人士使用,但前提是有人对他
们使用本产品进行监督或指导,以确
保他们安全使用,并且让他们明白相
关的危害。 不要让儿童在无人监督
的情况下对本产品进行清洁和保养。
- 切勿让儿童玩弄本产品。
- 务必始终将紫外线旅行收纳盒放在儿
童接触不到的地方。
- 如果在旅行收纳盒打开时紫外线 LED
灯保持亮起,请停止使用紫外线旅行
收纳盒。 紫外线灯光可能对人的眼
睛和皮肤造成伤害。
- 请仅使用经认证的适配器充电
- USB-C 线缆在接触水后应晾干,以防
止氧化
- 请仅使用飞利浦原装附件或消耗品。
请仅使用原装 USB-C 线缆
- 本产品不包含任何用户可维修的零
部件。 如果本产品损坏,请停止使
用,并联系您所在国家/地区的客户
服务中心 (请参见 ‚保修和支持‘)。 如
果电源线损坏,请更换新的充电器
和/或紫外线旅行收纳盒。
- 请勿在户外或高温表面附近使用充电
器和/或紫外线旅行收纳盒。
- 请勿将本产品的任何部件放入洗碗机
中清洗。
- 本产品设计仅用于清洁牙齿、牙龈和
舌头。
- 如果使用本产品后大量出血,并 在
使用 1 周后仍然持续出血、感觉不适
或疼痛,请停止使用本产品并咨询您
的牙医/医生。
- 如果您在前 2 个月中曾做过口腔或牙
龈手术,请在使用本产品前先咨询您
的牙医。
- 如果您体内有心脏起搏器或其他植入
设备,请在使用之前咨询医生或相关
植入装置的制造商。
- 如果您有医学问题,请在使用本产品
前咨询您的医生。
- 本产品为私人用品,不可供牙医诊所
或机构对多位患者使用。
- 请停止使用变形或刷毛弯曲的牙刷
头。 请每 3 个月更换一次牙刷头,
如果出现磨损迹象,应提前更换。
- 充电、使用和存放本产品的温度应
介于 32 °F / 0 °C 至 104 °F /
40 °C 之间。
- 请将产品和电池远离火源,切勿将其
暴露于阳光直射处或高温下。
- 如果产品异常发热或发出异味、变色
或充电时间比平时长,请停止使用并
停止为其充电,并联系飞利浦。
- 切勿将产品及其电池放置在微波炉中
或电磁炉上。
- 为防止电池发热或释放有毒有害物
质,切勿打开、改装、刺穿、损坏
或拆卸产品或电池。 切勿使电池短
路、过度充电或反向充电。
- 如果电池损坏或出现泄漏,请避免与
皮肤或眼睛接触。 如果不慎接触,
请立即用清水冲洗并就医。
电磁场 (EMF)
本 Philips 产品符合所有有关暴露于电
磁场的适用标准和法规。
Philips Sonicare(图 1)
1 刷头保护盖
2 牙刷头
3 手柄
4 电源开/关和模式按钮
5 刷牙模式
6 电量指示灯
7 充电器
8 紫外线旅行收纳盒
9 USB-C 线缆
注意: 外观可能略有不同,具体取决于
型号。
注意: USB-C 线缆仅与紫外线旅行收
纳盒兼容。
注意: 不随附电源适配器。 在中国,
使用者必须使用符合GB4706.1-2005
标准的5V直流、2W、IPX4电源适配
器。 建议使用飞利浦适配器;有关最新
信息,请访问飞利浦网站。
开始使用
安装牙刷头
1 对齐牙刷头,使刷毛方向与牙刷手
柄正面的方向一致。
2 将刷头向下按到金属轴上,直至剩
余 1-2mm 的小间隙为止。 (图 3)
注意:刷头与手柄之间会有微小间隙,
这属于正常现象 (图 3)。 这样刷头才能
正常振动。
为您的 Philips Sonicare 声波震动牙
刷充电
1 将电动牙刷手柄置于充电器上
(图 4)。
2 将充电器连接到 5 伏 USB 插墙式适
配器。
3 您的牙刷将持续充电,直至充满
电。
使用您的飞利浦 Sonicare 声波震动牙
刷
如果您是首次使用 Sonicare 声波震动
牙刷,通常会感觉其振动幅度比非电动
牙刷更强烈。 用户首次使用时通常会用
力过度。 只需轻轻用力即可实现良好的
刷牙效果。 请按照下方的刷牙说明操作
以获得最佳体验。
刷牙说明
1 浸湿刷毛并挤上少量牙膏。
2 将牙刷刷毛以小角度(45 度)放在
牙齿上 (图 5),轻轻按压使刷毛接
触牙龈线或牙龈线略下方。
注意:请在刷头紧贴牙齿后再启动
牙刷。
3 按电源开/关按钮打开飞利浦
Sonicare 声波震动牙刷。
注意: 始终将牙刷中间与牙齿接
触。
4 将刷毛轻轻放置于牙齿和牙龈上,
来回小幅度缓慢移动,这样可以让
刷毛能够刷到牙缝。 在整个刷牙周
期中连续这样移动即可。
MONTANA-high_300005813972_DFU-ROW-CHINA_LEALFET_foldedA7_BW.indd 1-6
MONTANA-high_300005813972_DFU-ROW-CHINA_LEALFET_foldedA7_BW.indd 1-6
18-11-21 15:29