Phoenix Gold ZDT-MG2 Bedienungsanleitung


Lies die bedienungsanleitung für Phoenix Gold ZDT-MG2 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Phoenix Gold ZDT-MG2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
IMPORTANT: Technical knowledge is necessary for installation Please ensure that the
correct tools are using during the installation to avoid damage to the vehicle or product.
Phoenix Gold can not be held responsible for the installation of this product.
PLUG & PLAY DSP AMPLIFER
INSTRUCTION MANUAL
PHOENIXGOLD.COM
V.1.1
Remove the OEM Head Unit
OEM Head Unit
Head Unit
STEP 1
STEP 2
OEM Head Unit
OEM
Head Unit
OEM
Head Unit
ZDT Harness
ZDC Harness
1. Connect the ZDT harness to the rear of the OEM head unit.
2. Connect the ZDT harness to the ZDC harness as shown in the above diagram.
3. Run the ZDC harness from behind the OEM head unit through the back of the dashboard to the
location of where you will position your amp. We would advise installing the ZDA amp under the
seat or in the boot of the vehicle.
NOTE: The information show above is a guide ONLY to installing the ZDA Amp under the passenger seat. Please be
advised that we would also recommend a trained professional auto electrician carry out the install of any of our products.
STEP 3
ZDA Amplifier
OEM Harness
Shown in Fig. 2
INSTRUCTION MANUAL
Example: Install under front seat
PHOENIXGOLD.COM
OEM Harness
Prior to installation the vehicle battery should be disconnected so no power is running to
any of the electrics in the vehicle.


Produktspezifikationen

Marke: Phoenix Gold
Kategorie: Nicht kategorisiert
Modell: ZDT-MG2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Phoenix Gold ZDT-MG2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten