Pioneer CA-ECO-UNI.003 Bedienungsanleitung

Lies die bedienungsanleitung für Pioneer CA-ECO-UNI.003 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 24 Bewertungen. Hast du eine Frage zu Pioneer CA-ECO-UNI.003 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

CA-ECO-UNI.003

VOLTAGE STABILIZER 7Vdc-12Vdc

Technical Description:

MinMax

Operating Input voltage range7 Vdc12 Vdc

Operating Output voltage12 Vdc*

Permanent Out current

5A dc continuous Up to 10A for 6 seconds

Key Out current100 mA

Standby consumption< 5 mA

Key In consumption< 1 mA

Max output power120 W

Efficiency-90%

Overcurrent/Short protectionYES (EXT FUSE)

Polarity reversal protectionYES (EXT FUSE)

Operating Temperature-40°C ÷ +85°C

Dimensions75x25x55mm

Weight300g

CertificationsE24(NSAI) approved according to R10-04

*The circuit only operates in a range of input voltage going

from 7V to 12V. Outside this range the circuit stops to

operate and the output voltage follows the input voltage

minus 0.6V. The Key Out signal is conditioned by the status

of the Key In and by the operating state of the regulator (see

graphics on page 2), and it is available as a signal for the car

stereo.

This harness allows to connect:

-YELLOW/RED: 7÷12Vdc input (Permanent In)

- BLUE: 7÷9Vdc input ignition key (Key In)

- YELLOW: 12Vdc output (Permanent Out)

- RED: 12V output key (Key Out)

- BLACK + BLACK: GND (both internally shorted)

The manufacturer will reserve to make technical changes to the device without notice.

All installation work must be performed by a qualified professional installer only.

The manufacturer / dealer is not liable for any kind of incidental or indirect damages.

1/2 Version 3.0 Written on 25 10 2017

10R-041548

Produktspezifikationen