Planet Audio P350MB Bedienungsanleitung


Lies die bedienungsanleitung für Planet Audio P350MB (12 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Planet Audio P350MB oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/12
Installation
Installation Procedures
First complete the electrical connections and then check for correctness.
Insert mounting collar into the dashboard and bend the mounting
tabs out with a screwdriver.
Make sure that lock lever is flush with the mounting collar( not
projecting outward)
.
This unit can be installed in any dashboard Having an opening as shown
below.
2.05 inches
7.20 inches
B ket keyrac
B ket keyrac
Plastic trim out
Installation
Connect all wiring harness and slide the head unit into the
mounting
collar until it clicks into place.
- Only use speakers with 4 ohms impedance.
- +12V DC Negative Ground.
- The maximum current of the Amp remote trigger is 200mA.
!
Wiring Connections
ANT
F-R R-R
F-L R-L
10
Radio Antenna
White
Front Left
Speaker
Rear Left
Speaker
Front Right
Speaker
Rear Right
Speaker
White/Black
ACC + (Red)
GND - (Black)
ANT + (Blue)
Power B+ (Yellow)
Gray/Black
Purple
Purple/Black
Green
Green/Black
Gray
Red: Front Right PRE-AMP Output
White: Front Left PRE-AMP Output
White: Rear Left PRE-AMP Output
Red: Rear Right PRE-AMP Output


Produktspezifikationen

Marke: Planet Audio
Kategorie: Nicht kategorisiert
Modell: P350MB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Planet Audio P350MB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten