Planet ANT-FP18A Bedienungsanleitung

Planet Nicht kategorisiert ANT-FP18A

Lies die bedienungsanleitung für Planet ANT-FP18A (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 3.8 Sterne aus 5.5 Bewertungen. Hast du eine Frage zu Planet ANT-FP18A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/3

- 1 -

ANT-FP18A

5GHz 18dBi Flat Panel Antenna

SPECIFICATION

※

※※

● Frequency：

：

：：5100~5900 MHz

● Max gain：

：

：：18dBi

● Connector：

：

：：N female

● Max input power：

：

：：10W Max

● Wave impedance：

：

：：50 OHMS ±

±±5

ΩΩ

● Dimensions：

：

：：270x205x15mm

● Weight：

：

：：990g

● For image/Data/Voice communication and Wireless LAN system

- 2 -

- 3 -

OUTDOOR INSTALLATION WARNING

IMPORTANT SAFETY PRECAUTIONS:

LIVES MAY BE AT RISK! Carefully observe these instructions and any special instructions that are included with

the equipment you are installing.

CONTACTING POWER LINES CAN BE LETHAL.

Make sure no power lines are anywhere where possible contact can be

made. Antennas, masts, towers, guy wires or cables may lean or fall and

contact these limes. People may be injured or killed if they are touching or

holding any part of equipment when it contacts electric lines. Make sure

there is NO possibility that equipment or personnel can come in contact

directly or indirectly with power lines.

Assume all overhead lines are power lines.

The horizontal distance from a tower, mast or antenna to the nearest power

line should be at least twice the total length of the mast/antenna combination.

This will ensure that the mast will not contact power if it falls either during

installation or later.

TO AVOID FALLING, USE SAFE PROCEDURES WHEN WORKING AT

HEIGHTS ABOVE GROUND.

Select equipment locations that will allow safe, simple equipment installation.

 Don’t work alone. A friend or co-worker can save your life if an

accident happens.

 Use approved non-conducting lasers and other safety equipment. Make sure all equipment is in good repair.

 If a tower or mast begins falling, don’t attempt to catch it. Stand back and let it fall.

 If anything such as a wire or mast does come in contact with a power line, DON’T TOUCH IT OR ATTEMPT TO MOVE IT.

Instead, save your life by calling the power company.

 Don’t attempt to erect antennas or towers on windy days.

MAKE SURE ALL TOWERS AND MASTS ARE SECURELY GROUNDED, AND ELECTRICAL CABLES CONNECTED TO

ANTENNAS HAVE LIGHTNING ARRESTORS. This will help prevent fire damage or human injury in case of lightning, static

build-up, or short circuit within equipment connected to the antenna.

 The base of the antenna mast or tower must be connected directly to the building protective ground or to one or more

approved grounding rods, using 1 OAWG ground wire and corrosion-resistant connectors.

 Refer to the National Electrical Code for grounding details.

IF A PERSON COMES IN CONTACT WITH ELECTRICAL POWER, AND CANNOT MOVE:

 DON’T TOUCH THAT PERSON, OR YOU MAY BE ELECTROCUTED.

 Use a non-conductive dry board, stick or rope to push or drag them so they no longer are in contact with electrical power.

 Once they are no longer contacting electrical power, administer CPR if you are certified, and make sure that emergency

medical aid has been requested.

Part No: 2011-E30130-001

Produktspezifikationen

Marke:	Planet
Kategorie:	Nicht kategorisiert
Modell:	ANT-FP18A
Breite:	270 mm
Tiefe:	15 mm
Gewicht:	990 g
Produktfarbe:	Weiß
Impedanz:	50 Ohm
Höhe:	205 mm
Antennentyp:	Richtantenne
Betriebstemperatur:	-40 - 70 °C
Montage:	Wand- / Mast
Antenne Zunahmeniveau (max):	18 dBi
Frequenzband:	5.1 ~ 5.9 GHz
Horizontale Lichtstrahlbreite:	10 °
Vertikale Lichtstrahlbreite:	10 °
Antenne Steckertyp:	N-Typ
Steckerverbindergeschlecht:	Weiblich
Spannung Stellung-Welle Verhältnis (VSWR):	2