Planet POE-173 Bedienungsanleitung

Lies die bedienungsanleitung für Planet POE-173 (4 Seiten) kostenlos online; sie gehört zur Kategorie Netzwerkkarte / Adapter. Dieses Handbuch wurde von 55 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 28 Bewertungen. Hast du eine Frage zu Planet POE-173 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET Single-Port

10/100/1000Mbps Ultra PoE Injectors, POE-172 and

POE-173.

ModelLAN Port SpeedPoE StandardPoE

Budget

POE-172 10/100/1000Mbps

Ultra PoE, backward

compatible with IEEE

802.3at/af standard

60

watts

POE-17310/100/1000MbpsUltra PoE60

watts

The term in the following section “Ultra PoE Injector”

of this User’s Manual means the POE-172 and POE-173.

The box of the Single-Port 10/100/1000Mbps Ultra PoE

Injector should contain the following items:

The Single-Port 10/100/1000Mbps Ultra PoE Injector

x 1

User’s Manual x 1

AC Power Cord x 1

If any of these are missing or damaged, please contact

your dealer immediately; if possible, retain the carton

including the original packing material, and use them

again to repack the product in case there is a need to

return it to us for repair.

2. Product Features

Interface

2 x RJ45 interface

1-port Data + Poweroutput

1-port Data input

1 x AC 100-240V input power socket

Power over Ethernet

Ultra Power over Ethernet PSE

Up to 60 watts of power on 4-pair UTP cable

Backward compatible with IEEE 802.3at/af PD

device (POE-172)

Auto-detection of PoE IEEE 802.3at/af equipment

and devices to check whether there’s any damage

done via incorrect installation (POE-172)

Remote power feeding up to 100m

Hardware

All-in-one compact size design

Internal power supply

LED indicators for Power LED and Active LED (PoE

ready/in-use)

Note

PSE (Power Sourcing Equipment) is a

device (switch, or hub for instance) that

will provide power in a PoE setup. The

maximum allowed continuous output power

per such device in IEEE 802.3af is 15.4

watts, in IEEE 802.3at is 30 watts and ultra

PoE is 60 watts

Note

PD (Powered Device)such as an IP

phone, network camera or wireless access

point is a PoE-enabled terminal by PSE and

thus it consumes energy.

3. Product Specications

ProductPOE-172 POE-173

Hardware Specications

Interface

LAN1 x RJ45 STP, Input Port“Data”

PoE 1 x RJ45 STP, “Data + Power”

Output Port

AC Connector1 x AC input power socket,

IEC-320 C6

Network

Cable

Ultra PoE

(60W)

4-pair UTP Cat. 5, 5e, 6 up to

100m (328ft)

802.3af/

at PoE

(15W/30W)

2-pair UTP Cat. 3, 4, 5, up to

100m (328ft)

LED Indicator

System: Power x 1 (Green)

PoE Port: Active, PoE ready/

in Use x 1 (Green)

Data Rate10/100/1000Mbps

Dimensions (W x D x H)115 x 62.5 x 31 mm

Weight235g 177g

Unit Output VoltageDC 56V, 1.08ADC 50V, 1.2A

Power Requirements100-240V AC @50/60Hz,

1.5A max.

Power Consumption60 watts max.

Operating Temperature0 ~ 50 degrees C

Storage Temperature-10 ~ 70 degrees C

Operating Humidity5 ~ 95%, relative humidity, non-

condensing

Storage Humidity5 ~ 95%, relative humidity, non-

condensing

Power over Ethernet

PoE Standard

Ultra PoE over

4-pair UTP cable,

IEEE 802.3at

Power over

Ethernet Plus End-

span/Mid-span PSE

Ultra PoE

over 4-pair

UTP cable

PoE Power Supply TypeEnd-span + Mid-span

Power Pin AssignmentPair 1 End-Span: 1/2 (+), 3/6 (-)

Pair 2 Mid-Span: 4/5 (+), 7/8 (-)

PoE Power Output

DC 56V/60-watt

PoE via 4-pair

DC 56V/30-watt

PoE via 2-pair

DC 50V/60-

watt PoE via

4-pair

DC 50V/30-

watt PoE via

2-pair

Standards Conformance

Standards Compliance

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast

Ethernet

IEEE 802.3ab 1000BASE-T Gigabit

Ethernet

IEEE 802.3at Power over Ethernet

Plus

IEEE 802.3af Power over Ethernet

Regulatory ComplianceFCC Part 15 Class B, CE

4. Product Outlook

Figure 1: An overview of Ultra PoE Injector.

Rear Panel

Front Panel

Top Panel

Bottom

Figure 1: POE-172 & POE-173 Outlook

LED Indicators

LED ColorFunction

POWERGreen It indicates that the Ultra PoE Injector has

power.

ACTIVEGreen It indicates the port is providing 56V (POE-

172) or 50V (POE-173) DC in-line power.

5. Hardware Installation

The following section describes the hardware features of

Ultra PoE Injector. Before connecting any network device

to the Ultra PoE Injector, read this chapter carefully.

5-1 Before Installation

The POE-172 is backward compatible with IEEE 802.3af

PoE and IEEE 802.3at PoE Plus standard. It is equipped

with an AC power cord with 100-240V AC input and

injects DC 56V power into the pin of the twisted pair

cable (pair 1/2 [+], 3/6 [-] and pair 4/5 [+], 7/8 [-])

for 60-watt ultra PoE injection.

Before connecting the POE-172 to your powered device

(PD), please check to ensure that your powered device

(PD) can accept 60-watt PoE power through pin 1/2 (+)

& 3/6 (-) and pin 4/5 (+) & 7/8 (-). Otherwise, it will

damage your powered device (PD).

Note

DO NOTconnect POE-173 POE port to

your non-POE network equipment Ethernet

interface. Otherwise, it will damage your

network equipment.

If there is difculty in nding a power socket for AC-DC

adapter of your non-PoE network device, the Ultra PoE

Injector and POE-171S (Ultra PoE Splitter) can provide

you with DC power for this Ethernet device conveniently

and easily.

Note

The Ultra PoE Injector and POE-171S can

be installed in pair. However, the use of the

third-party device is allowed if the device

complies with IEEE 802.3at Power over

Ethernet Plus and a maximum of 30 watts

of output capability.

Note

Since the Ultra PoE injector’s PoE port

supports 56V DC (POE-172) or 50V DC

(POE-173) PoE power output, please check

and assure the Powered Device’s (PD)

acceptable DC power range is 56V DC

or 50V DC; otherwise, it will damage the

Powered Device (PD).

5-2 Ultra PoE Injector Installation

Due to the backward capability of IEEE 802.3at/af PoE

standard, the Ultra PoE Injector can directly connect

with any IEEE 802.3at/af end-nodes such as PTZ (Pan,

Tilt & Zoom) speed dome network cameras, color touch-

screen voice over IP (VoIP) telephones, and multi-

channel wireless LAN access points. The screen in Figure

2 is shown below.

Produktspezifikationen