Polaroid LS1024EU Bedienungsanleitung

Lies die bedienungsanleitung für Polaroid LS1024EU (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 4 Bewertungen. Hast du eine Frage zu Polaroid LS1024EU oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Solar Charge Controller | LS1024EU

Manual | Page 1 of 2

Energy Systems

1. Safety Information

• Read all of the instructions in the manual before installation.

• DO NOT disassemble or attempt to repair the controller.

• Install external fuse or breaker as required.

• Do disconnect the solar module and fuse/ breakers near to battery before installing

or moving the controller.

• Power connections must remain tight to avoid excessive heating from a loose connection.

• Only charge batteries that comply with the parameters of controller.

• Battery connection may be wired to one battery or a bank of batteries.

• Risk of electric shock, the PV and load can produce high voltages when the controller

is working.

2. Overview

The Polaroid Solar Charge Controller is a PWM charge controller that adopts the most

advanced digital technique. It’s an easy operation and cost ef cient controller featured as:

• 3-Stage intelligent PWM charging: Bulk, Boost/Equalize, Float

• Support 3 charging options: Sealed, Gel, and Flooded

• Battery status LED indicator can indicates battery situation

• Battery temperature compensation function

• With humanized settings, operation will be more comfortable and convenient

• The USB will provide power supply that can charge for electronic equipment

• Battery type and load output can be set via button

• Extensive Electronic protection

3. Product Features

PV TerminalsLoad Switch Button

Battery TerminalsBattery status LED indicator

Load TerminalsLoad status LED indicator

 USB output interface Charging status LED indicator

Mounting Hole ø4.5mm

4. Wiring

Connect the system in the order of battery loadPV array and disconnect the 

system in the reverse order (see  gure 2).

NOTE:While wiring the controller do not close the circuit breaker or fuse and

make sure that the leads of „+“ and „-“ poles are connected correctly.

NOTE: A fuse which current is 1.25 to 2 times the rated current of the controller

must be installed on the battery side with a distance from the battery not greater

than 150 mm.

NOTE:If an inverter is to be connected to the system, connect the inverter directly

to the battery, not to the load side of the controller.

5. LED Indicators

• Charging and load status indicator

Indicator ColorStatusIntroduction

Charging status

LED indicator

Green ChargingON

GreenOFFNot charging

GreenFast  ashingBattery over voltage

Load status LED

indicator

GreenLoad ONON

GreenOFFLoad OFF

GreenSlowly  ashingLoad overload

GreenFast  ashingLoad short circuit

• Battery status indicator

LED1LED2LED3LED4Battery Status

Slowly  ashingUnder voltage×××

Fast  ashingOver discharge×××

Battery LED indicator status during voltage is up

oo12.8V < U× ×bat < 13.4V

ooo13.4V < U×bat < 14.1V

oooo14.1V < Ubat

Battery LED indicator status during voltage is down

ooo12.8V < U×bat < 13.4V

oo12.4V < U× ×bat < 12.8V

o U××× bat < 12.4V

NOTE:

1) Voltage value for 12V system at 25ºC, please use 2x in 24V system

2) “o“LED indicator on | „דLED indicator off.

6. Setting operation

1) Load ON/OFF Setting

When the controller is powered on, press the button to control the load output.

2) Battery Type Setting

Operation:

Step 1: Enter setting mode by pressing button for 5s until the battery status LEDs are

 ashing.

Step 2: Select the desired mode by pressing button.

Step 3: The mode will be saved automatically without any operation for 5 seconds and

LED will stop  ashing.

Battery type indicator

LED1LED2LED3Battery type

oSealed (Default)× ×

o oGel×

o ooFlooded

Note: “o“LED indicator on | „דLED indicator off



















LED1 LED2LED3 LED4





Mini Anderson Input

USB Output

DC5V 1.2A



Figure 2

Button

Smart technology for a better world

Produktspezifikationen