Powerplus RK3 Bedienungsanleitung


Lies die bedienungsanleitung für Powerplus RK3 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 38 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 19.5 Bewertungen. Hast du eine Frage zu Powerplus RK3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
1. Package Contents
Right rail slider x 1
Left rail slider x 1
Nut M6 x 6
Screw M6 x 8
Fixing stud x 4
2. Assembly Steps
Step 1: Insert 4 pieces of fixing nuts into the following locations of rail sliders. Be sure fix
them firmly. Then, pull apart two ends of rail sliders and place them in a chassis. Be sure the
pulling distance meets the depth of rack chassis and place fixing studs to the corresponding
holes on supporting columns. For example, if depth of rack chassis is 700mm, please pull the
length of rail sliders is 700mm.
Quick Assembly
for Rack Mount Slider
V. 1.1
Nut M6
Screw M6
Right rail slider
Left rail slider
Fixing stud
Fixing stud
Fixing stud
Fixing stud
Fixing stud
Step 2: Use 4 pieces of M6 screws to mount rail sliders into chassis. See chart below:
Step 3: According to UPS height, put 6 pieces of nuts on proper location.
Step 4: Put UPS with assembled ears on the rail support.
Step 5: Fix the UPS in position with 4 screws.
Step 6: Assembly complete.
M6 screw
M6 screw
M6 screw
Nuts x 3
Nuts x 3
Nuts x 3
Nuts x 3


Produktspezifikationen

Marke: Powerplus
Kategorie: Nicht kategorisiert
Modell: RK3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Powerplus RK3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten