Prem-i-air EH1274 Bedienungsanleitung

Prem-i-air Herd EH1274

Lies die bedienungsanleitung für Prem-i-air EH1274 (8 Seiten) kostenlos online; sie gehört zur Kategorie Herd. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 15.5 Bewertungen. Hast du eine Frage zu Prem-i-air EH1274 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
EH1274
1.5kW Convector Heater
2 Heat settings
Adjustable thermostat
Free-standing or wall mounting
Convenient built-in carrying handle
Safety overload cut-out
2 year guarantee
Page 1
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the
user of the product for future reference.
INSTALLATION
For free-standing use: attach the feet to the underneath of
the heater using the four 12mm (½") screws.
To wall-mount: Firstly, remove the lower brackets from the
back of the heater, turn them upside down and replace them,
so that the tags protrude below the heater.
Referring to the diagram opposite, draw two horizontal lines
on the wall 308mm (12¼") apart, the lower line more than
50mm (2") from the floor.
On the upper line, drill holes 250mm (9¾") from the centre
line, using a 6mm (¼") masonry bit, and insert a wall plug.
Insert a screw into the hole and almost fully tighten.
On the upper line, drill holes 233mm (9¼") from the centre
line, using a 6mm (¼") masonry bit, and insert a wall plug.
Hang the heater on the two top brackets using the keyhole
slots on the back.
The lower brackets should now line up with the lower holes.
Insert a screw into the each of the holes through the
brackets, and fully tighten.
Page 2
DRILLING DIMENSIONS FOR WALL MOUNTING
Page 3


Produktspezifikationen

Marke: Prem-i-air
Kategorie: Herd
Modell: EH1274

Brauchst du Hilfe?

Wenn Sie Hilfe mit Prem-i-air EH1274 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten