Premier Sydney Bedienungsanleitung

Lies die bedienungsanleitung für Premier Sydney (3 Seiten) kostenlos online; sie gehört zur Kategorie Telefon mit Schnur. Dieses Handbuch wurde von 50 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 8 Bewertungen. Hast du eine Frage zu Premier Sydney oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

GB

1

INSTALLATION

Installation of the Premier SYDNEY (Illustration I)

•Click one of the transparant plugs at the end of the telephone cord in the

‘LINE’ connection point on the bottom of your SYDNEY.

•Click one of the transparant connection plugs at the end of the telephone

cord of the SYDNEY in your telephone plug.

•This telephone plug can now be plugged into the wall socket of your tele-

phone connection point.

Wall assembly (Illustration II)

This telephone can also be mounted on a wall.

You can do this by fixing the appliance with 2 screws.

This first screw is positioned 75 mm vertically above the other.

CAUTION! NOTE THAT THE CONNECTING SCREWS MUST PROTRUDE

0,5 CM OUT OF THE WALL.

TONE/PULSE SWITCH

With this switch you can place the SYDNEY phone in the appropriate dialling

system: Pulse or Tone.

How do you know in which position this switch must be?

•Place the switch in TONE-position (T).

•Pick up the handset and dial a random number.

•If the connection is made, leave the switch in TONE-position.

•If the dialling tone continues and you therefore are unable to make any

telephone connection with the desired number, you have to place this

switch into PULSE-position (P).

This switch is not used in countries where only “TONE” dialling is available.

THE ‘TELE-SERVICES’ / PT KEY

If your telephone only works in PULSE mode and not in TONE mode as de-

scribed above, you normally cannot use the Tele-Services such as Tele-

banking, Tele-shopping etc...

With this Tele-Services key you can use these services without any problem.

During dialling you’ll be able to temporarily switch from PULSE-mode to TONE-

mode.

•Pick up the phone.

•Dial the required number (in PULSE dialling mode).

•Wait till connection is made.

•Press the P

T key.

•Each number dialled from this moment is using the TONE dialling mode.

M_Sydney_GB_New.pmd27.02.2003, 16:211

Produktspezifikationen