Premier W12 Bedienungsanleitung
Lies die bedienungsanleitung für Premier W12 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 10 Bewertungen. Hast du eine Frage zu Premier W12 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
Heavy-Duty Paper Trimmers
Key Features and Benefits
• Heavy-duty 3/4” thick wood base
• Fully-hardened self-sharpening steel blades cut up to 20 sheets
• Accurately cuts paper, matte board, cardboard, film, tissue, and textiles
• Permanent 1/2” grid and dual rulers for proper paper alignment
• Patented automatic blade latch locks with every cutting motion
• Finger guard helps protect the entire blade length
• Torsion spring counterbalances blade arm
• Non-skid feet
Model Numbers
W12 – 12” cutting length
W15 – 15” cutting length
W18 – 18” cutting length
W24 – 24” cutting length MADE IN USA
W18 PARTS LIST W24 PARTS LIST
Literature Part No. M-S027086 Rev. 8 11/12/14
Key Components
A – Hand Grip/Blade Arm/Blade Latch Assembly
B – Wood Base with Molded End Caps
C – Alignment Ruler
D – Finger Guard
E – Paper Guide Ruler
Assembly Instructions
Place the non-skid rubber feet into position on the bottom of the trimmer.
Automatic Safety Latch
The patented automatic blade latch is a key safety feature of this trimmer. It will lock with every complete cutting
stroke, helping to eliminate forgetfulness. Remember to always push the blade arm down completely when you
are finished cutting, to ensure that the latch activates. Never remove the latch for any reason.
A
E
C
D
AUTOMATIC BLADE
SAFETY LATCH
B
Operating Instructions
1. Place the trimmer on a flat, stable surface
2. Release the blade latch, which is located on the hand grip (A)
3. Lift the blade arm (A) up into cutting position
4. Using the rulers or the 1/2” grid, align the paper to the proper position, pushing it up against the paper
guide ruler (E). It is recommended to use the guide ruler (E) as a point of reference only, paper should not be
lined with this ruler. For a more accurate measurement, use the grid and alignment ruler (C).
CAUTION:
Keep hands and fingers behind the finger guard (D)
at all times, away from the cutting blades
5. While holding the paper down with your left hand (to make sure it stays in place), pull down the blade
arm (A) to cut.
6. Always make sure that the blade arm is completely down and locked when not in use.
Safety Information
• Always ensure that the blade arm is fully pushed down, and that the blade latch is engaged, when not in use
• Never operate the trimmer without the finger guard in place
• Always keep clothing, jewelry, watches, and hair away from the cutting blade
• Keep out of the reach of children
• Do not carry the trimmer by the hand grip or the blade arm
For Best Cutting Performance
Use Trim-Ease Blade Lubricant for a smoother cut and to help preserve the life of the cutting blade. To order,
please contact customer service at the number below and ask for Trim-Ease Blade Lubricant, part number
MRS037046.
Customer Service
Telephone: (260) 563-0641
Fax: (260) 563-4575
Email: info@martinyale.com
Internet: www.martinyale.com
Address: Martin Yale Industries, Inc.
251 Wedcor Avenue
Wabash, IN 46992
Visit www.martinyale.com for information on office products, including paper folding machines, punches, letter
openers, catalog racks, and computer keyboard drawers.
WrongRight
ATTENTION:
Produktspezifikationen
| Marke: | Premier |
| Kategorie: | Nicht kategorisiert |
| Modell: | W12 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Premier W12 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Premier
24 August 2024
Bedienungsanleitung Nicht kategorisiert
- Block
- Selec
- Parkside
- Hatco
- AXESS
- Kitronik
- Murr Elektronik
- Deflecto
- BIOS Medical
- Mercury
- Microlife
- Fisher-Price
- Dormakaba
- Elektron
- Aiptek
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025