Pro-Ject Debut PRO S Bedienungsanleitung

Lies die bedienungsanleitung für Pro-Ject Debut PRO S (2 Seiten) kostenlos online; sie gehört zur Kategorie Plattenspieler. Dieses Handbuch wurde von 45 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 2 Bewertungen. Hast du eine Frage zu Pro-Ject Debut PRO S oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Debut PRO S

Setup Guide

Getting started:

• Make sure to have enough space to unpack your turntable.

• Always unpack and set up in a clean environment.

• Please Do NOT throw away the packaging! If you need

service or want to return your product, please send it

in the original packaging including all inserts. In case of

damage due to alternative packaging your dealer cannot

guarantee a full refund.

• complete manual:

www.project-audio.com/en/product/debut-pro-s

1Unpack all items from accessory bag:

Remove dust cover carton from the box. Lift the wrapped turntable out of the box.

a) Anti Skating Weight

b) Flat belt (33 RPM) and round belt (78 RPM)

c) Adapter for 7“ singles / Allen keys

d) Connect it E RCA cable

e) Gauge for tracking force setting

f) Cartridge alignment protractor

Carefully remove the protective cover.

34

25 Unpack power supply, record puck and

counterweight from the bottom inserts.

Unpack the platter.

If necessary, level the turntable by

adjusting the feet.

6 8

7Put the drive belt (b) on the pulley at

and sub-platter. 9

Put the platter on the turntable. The turntable should always be placed on

a at surface. Check with a spirit level*.

Large pulley for round belt (78 RPM)

Screw the counterweight in place.Put the gauge (e) on the platter.

10 11 12 13

Remove tonearm twist tie.

Lower the tonearm with the lift.

16 Put the loop of the Anti Skating Weight (a)

in the outer notch on the tonearm post.

Place the stylus on the gauge, so your

stylus sits on the point marked “23”.

14 17

15 Balance the tonearm by turning the counter-

weight forwards and backwards on the rod.

When the gauge stays level, your

tracking force is set correctly.

0°

Plug in power supply and Connect it E (e).

Yellow marks should be at the amplier end.

18 19 Install the dustcover. Connect to your hi-system and

have fun with music!

21

20 Use the rocker-switch on the bottom

left to select the playback speed.

33 RPM

RIGHT:

45 RPM / 78 RPM

STANDBY

MIDDLE:

LEFT:

*a spirit level can be purchased separately

a)

b) c) d) e)

f)

Produktspezifikationen