Pro-Ject Speaker Box 3E Carbon Bedienungsanleitung

Pro-Ject Lautsprecher Speaker Box 3E Carbon

Lies die bedienungsanleitung für Pro-Ject Speaker Box 3E Carbon (8 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 2 Bewertungen. Hast du eine Frage zu Pro-Ject Speaker Box 3E Carbon oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
INSTRUCTIONS FOR USE
Speaker Box 3E Carbon
© Pro- S E 4. . Ject Audio Systems · peaker Box 3 Carbon · Revision 202 01 09
2
Dear music lover,
thank you for purchasing a speaker ect P -Jfrom ro A . udio Systems
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Safety instructions
Avoid spilling liquids on speaker, connection terminal or speaker cable. Never place any item
containing liquid, such as a flower vase on or near the device. Never place any naked flame
sources, such as lighted candles on or near the speakers. The product shall not be used in damp or
wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Loudspeaker positioning
Ideally away wall ,8 apart., the loudspeakers should be positioned at least 60 cm from s and 1 s meter The
space between the two loudspeakers and the distance to the listeners are important. If loudspeakers are placed
too close together or too far apart, stereo images will not be fully developed. In average living rooms, speaker
spacing between 2 and 4 meters will usually produce satisfactory results. The listener s distance to the
loudspeakers should be equal to the distance . between the loudspeakers (equilateral triangle)
T he height is also an important factor. The tweeter of the speaker should be on the same height as your ears.
If you have the space, we always recommend using speaker stands. If not, we recommend using "Damp it"
adjust the height of the speaker.
A -ngle your speakers inward, so the drivers directly point to your ears. Toeing in the speakers helps with the
to find your sweet spot!
© Pro- S Ject Audio Systems · peaker Box 3E Carbon · Revision 202 01 094. .
3
Amplifier capacity - power handling
Your loudspeaker system will operate satisfactorily with any good amplifier designed for -use with an 4 8 Ohm
impedance load. Although loudspeakers are designed to handle high power loadings, you must remember
that any loudspeaker that is abused with excessive use zof volume, tone controls and graphic equali ers is likely
levels as these may be liable to go into „clipping mode“ and distort the signal causing possible damage. If you
hear a distorted signal through the loudspeakers, you must reduce the power level.
Connection to your amplifier
We strongly recommend the use of high- quality speaker cables, colour coded or grooved cables are
terminal on your amplifier. Repeat the instructions for the left channel. Do NOT connect more than one -hand
loudspeaker to one terminal on your amplifier.
Set the volume level to minimum before switching on the amplifier!
Speaker Grills
W e recommend operating the speakers without grills, as the delicate treble can spread absolutely freely. Our
almost acoustically transparent speaker grilles only serve as protection against outer influences (e.g. pets).
Wall mount
Wall mount brac . kets are available separately Please contact your dealer for further information.


Produktspezifikationen

Marke: Pro-Ject
Kategorie: Lautsprecher
Modell: Speaker Box 3E Carbon

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pro-Ject Speaker Box 3E Carbon benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten