Profoto RFi Softbox Octa Bedienungsanleitung

Profoto Nicht kategorisiert RFi Softbox Octa

Lies die bedienungsanleitung für Profoto RFi Softbox Octa (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 2 Bewertungen. Hast du eine Frage zu Profoto RFi Softbox Octa oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
HOW TO
MOUNT YOUR
RFi SOFTBOX
RFi SOFTBOX
MOUNTING INSTRUCTION
1. Position the rounded rod end into the loops.
Color markings on the rod end should be
towards center.
bending the rods. By slightly bending the
opposite rod against your leg or the floor
the tension on the softbox will decrease and
mounting gets easier. Repeat the procedure
when disassembling the softbox.
7. Tighten the diffuser all around to prevent
leakage. Mount the outer diffuser close to the
silver side and not to the softbox outer edge.
The softbox is now ready to use. Now mount
it on your Profoto flash.
3. Check the color of the dot on the rods of your
softbox, e.g. if theres a blue dot you match it
with the blue dots on your RFi Speedring.
6. Attach and stretch the inner diffuser with
the Velcro attachment.
2.
Press the rod fully into the corner pocket.
The rod should stay in the pocket even when
disassembling the softbox.
5. Tighten the softbox fabric with the Velcro to
prevent light from leaking out.
Octa
Strip
Square
Rectangular


Produktspezifikationen

Marke: Profoto
Kategorie: Nicht kategorisiert
Modell: RFi Softbox Octa

Brauchst du Hilfe?

Wenn Sie Hilfe mit Profoto RFi Softbox Octa benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten