Progress Lighting P8241 Bedienungsanleitung
Seiten 6 Beleuchtung
Lies die Bedienungsanleitung für Progress Lighting P8241 kostenlos online oder lade das PDF herunter. 6 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
KEEP THESE INSTRUCTIONS
Page 1 of 6
SPEC. NO. 93054065 2-22-16
P8240, P8241, P8222, P8247& P8147 SERIES
Assembly & Installation Instructions
CAUTION:
Read instructions carefully and turn electricity off at main circuit breaker panel before beginning
installation.
WARNING: Follow the instructions carefully to assure full compliance with local, state, and NEC requirements. If there are any
questions, contact a Qualified Electrical Contractor.
WARNING: Risk of fire or electrical shock. Install this kit only in 4" Junction Boxes per the dimensions shown.
WARNING:To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
CAUTION: Risk of fire. Consult a Qualified Electrician to ensure correct branch circuit conductor.
NOTE:This product is designed to operate with most standard incandescent or low voltage electronic dimmer switches. Results
may vary. For recommended dimmers, consult product specification sheet for more details.
NOTE: SUITABLE FOR WET LOCATIONS IN COVERED CEILINGS
WARNING:This product contains chemicals known to the State of California to cause cancer, birth defects and/or other
reproductive harm. Thoroughly wash hands after installing, handling, cleaning, or otherwise touching this product.
NOTE: Always install with ambient temperatures specified on the product specification sheet. 5 year warranty.
See www.progresslighting.com for details.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PTODUCT AND THE HAZARDS INVOLVED.
1. Mount the bracket to the junction box with two screws.
2. Connect wires as noted and shown.
3. Always attach the ground wire to the screw on the bracket.
4. Align the wire spring clips with center hole in the bracket and push until the unit snaps into place. If the unit does not snap into place,
make sure junction box and bracket are flush with the ceiling.
BRACKET
SPRING
CLIPS
TRIM SHAPE
MAY VARY.
GROUND
SCREW
1/2" MINIMUM JUNCTION BOX DEPTH
4" JUNCTION BOX
Produktspezifikationen
| Marke: | Progress Lighting |
| Kategorie: | Beleuchtung |
| Modell: | P8241 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Progress Lighting P8241 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung Progress Lighting
Progress Lighting P4618 Bedienungsanleitung Progress Lighting P350248 Bedienungsanleitung Progress Lighting P550126 Bedienungsanleitung Progress Lighting P400396 Bedienungsanleitung Progress Lighting P400440 Bedienungsanleitung Progress Lighting P730006 Bedienungsanleitung Progress Lighting P350253 Bedienungsanleitung Progress Lighting P350142 Bedienungsanleitung
Alle Progress Lighting Beleuchtung Bedienungsanleitungen
Beliebt in Beleuchtung
Progress Lighting P87-LED Bedienungsanleitung Progress Lighting P1871-LED Bedienungsanleitung Progress Lighting P2576 Bedienungsanleitung
Bedienungsanleitung Beleuchtung
Neueste Bedienungsanleitungen für Beleuchtung
IKEA GREJSIMOJS 606.020.41 Bedienungsanleitung Robert Abbey A788X Bedienungsanleitung Robert Abbey AM701 Bedienungsanleitung Robert Abbey CR980 Bedienungsanleitung Living & Co LE2500305TD Bedienungsanleitung Living & Co LS7R01 Bedienungsanleitung Robert Abbey 1791X Bedienungsanleitung IKEA GREJSIMOJS 506.038.66 Bedienungsanleitung IKEA VARMBLIXT 806.135.24 Bedienungsanleitung IKEA BÄVE 903.997.26 Bedienungsanleitung