Proofvision PV19BF Bedienungsanleitung

Proofvision Fernseher PV19BF

Lies die bedienungsanleitung für Proofvision PV19BF (3 Seiten) kostenlos online; sie gehört zur Kategorie Fernseher. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu Proofvision PV19BF oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/3

Installation manual

INSTALLATION MANUAL

It is the installer's responsibility to ensure that your waterproof LED TV is installed and sealed

correctly. Your warranty becomes void if problems occur due to faulty installation or poor sealing.

1. Decide on the correct position for your TV. Test the TV in that position to make sure the viewing

angle is appropriate for the viewing position. Each waterproof TV model has specic viewing

angels. Position the front bezel in order to view the picture clearly from all intended areas. Should

there be any doubt, make the area safe and power up the LED, positioning the screen until satised

that the picture does not darken or disappear from view.

2. Once you have your position check for any hazards that may stop you installing in this area, i.e.

cables or pipes. When mounting in stud walls, check for any supporting framework behind the

plasterboard.

3. Use the table below to work out the cut out size within the wall to t the TV. The recess in the

wall should be the cut to the size of the mounting plate dimensions.

4. Open up the cable cover by unscrewing all 8 screws, connect the power cable and the Arial (RF

cable) and also any other desired cables. Place the cable cover back, in line with the holes and

screw it back into place, making sure that it is secure and tight. Chase all cables into the wall at the

bottom of the TV to reduce chances of water reaching the TV.

5. When all the material is removed within the dimensions detailed to suit your size of the TV. Use

the screws provided to x the mounting case in place. Make sure the edges of the mounting case

are directly in line with the wall or tiles. Also make sure the mounting case is securely tted as this

supports your TV unit.

6. Now the TV is connected check that all the functions of the TV are working before tting. The

signal level feed to the TV must be at least 65db/1 mill volt or the picture may be noisy or pixelated

and dicult to tune. A distribution amplier may be required if you are in a weak signal area. If in

doubt, consult a qualied aerial technician.

ProofVision

Front

486

576

826

1057

1380

340

395

562

682

825

13.5

410

500

709

930

1217

260

288

399

523

686

467

566

795

1020

1281

324

379

524

640

796

Side Back

Front frame (mm) Back mounting box (mm)

Size

19”

24“

32”

42”

55”

Installation manual

7. Apply a continuous unbroken bead of clear waterproof silicon around the inside of the television

bezel at least 5mm thick. Use clear, mould resistant waterproof bathroom sealant. All models do

not require any ventilation considerations.

8. Oer the television to the wall cut out and place the TV into the back plate, push the TV down to

lock the TV into the back plate lugs. Wipe away all excess silicon from the outside of the bezel using

a damp soft lint free cloth. Allow 24hrs to dry before use.

9. It is critical the bezel is rmly sealed to the wall surface to complete the waterproof properties of

the installation. Failure to properly seal the TV may result in water leaking behind the screen and

wall surface, which could result in damage to either the TV or wall. Damage caused to the

television in this way is not covered by warranty.

Installation manual

IMPORTANT SAFETY INFORMATION

1. Do not attempt to remove the back of this TV; this can expose you to high voltage and risk of

electric shock or re.

2. Do not attempt to modify this product in any way as this will invalidate your warranty and

expose the risk of electric shock or re.

3. Only use the supplied AC DC transformer and ensure the main power cord is plugged into a non

damaged socket and away from any heat source. The power supply is not waterproof and must be

positioned in a dry, well ventilated area away from water and moisture.

4. Do not connect the TV direct to the mains socket without converter.

5. Position your TV so that no bright light, sunshine or direct heat can aect the TV.

6. If there are any unusual smells or sounds coming from the unit, disconnect the power and

contact your supplier.

7. The unit must be earthed to the main earth system of the building and must conform to the

latest electrical safety regulations.

8. When cleaning your TV do not apply any abrasive cleaners, wax, benzene, alcohol or cleaning

detergents. Chemical cleaners may fade dissolve or crack the TV surface. We recommend a soft

damp cloth and non abrasive cleaner.

Please note that the installation of your TV should be carried out by a technically competent

person and must conform to all the relevant regulations. If in doubt please contact ProofVision or a

qualied electrician.

For further assistance please call 0845 467 2593 or email technical@proofvision.co.uk

Produktspezifikationen

Marke:	Proofvision
Kategorie:	Fernseher
Modell:	PV19BF
Bildschirmdiagonale:	19 "
Eingebaute Lautsprecher:	Ja
WLAN:	Nein
Bluetooth:	Nein
On-Screen-Display (OSD):	Ja
Fernbedienung enthalten:	Ja
HD-Typ:	HD
Bildschirmform:	Flach
Natives Seitenverhältnis:	16:9
Helligkeit:	250 cd/m²
Reaktionszeit:	5 ms
Bildwinkel, horizontal:	170 °
Bildwinkel, vertikal:	170 °
Digitales Signalformatsystem:	DVB-T
Anzahl HDMI-Anschlüsse:	1
Anzahl der Lautsprecher:	2
Kontrastverhältnis (dynamisch):	10000:1
PC-Eingang (D-Sub):	Ja
Breite (ohne Standfuß):	482 mm
Höhe (ohne Standfuß):	340 mm
3D:	Nein
Smart-TV:	Nein
Internet-TV:	Nein
Miracast:	Nein
Anzahl VGA (D-Sub) Anschlüsse:	1
Anzahl OSD-Sprachen:	8
Anzahl S-Video-Eingänge:	1
Display-Auflösung:	1366 x 768 Pixel
Ethernet/LAN:	Nein