Provision ISR TVL-391AS36 Bedienungsanleitung
Provision ISR
Überwachungskamera
TVL-391AS36
Lies die bedienungsanleitung für Provision ISR TVL-391AS36 (8 Seiten) kostenlos online; sie gehört zur Kategorie Überwachungskamera. Dieses Handbuch wurde von 22 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 11.5 Bewertungen. Hast du eine Frage zu Provision ISR TVL-391AS36 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8

1080P Sirius Full color HD Series
USER MANUAL

1
Co ten nts
1) CAUTIONS
2 ) Product Introd tionuc
2.1 Camera Introduction
2.2 Pr Featuresoduct
3)
M Setupenu
4) Pro t I tallationduc ns
5)
Technical Specification
4.1 General Notes
4.2 Installation Tools and Information
4.3 Insta ation Methodll
4.4
Connections
4.6 OSD Control
4.5 Lens Control
4.7 OSD Layout Scheme
4.8 Comments & Special Features

2 3
1 CAUTIONS
1. To reduce the risk of electric shock, do not open the
machine and maintain by yourself, please consult a
professional service person.
2. To prevent fire or shock hazard, use the power after
safety certification, the input voltage, current, voltage
polarity and operating temperature must meet the
requirements of this camera.
3. Please note the operating temperature and environ-
mental requirements of the camera, avoid too low or too
high temperature. General operating temperature range
of -10°C ~ +50°C (Fahrenheit temperature is 14°F ~
122°F). Avoid flooding and rain, minimize dust and
moisture erosion, otherwise camera would be damaged.
4. Cameras in use should avoid direct sunlight, glare,
otherwise the sensor will be damaged.
5. Do not touch the sensor surface, if any foreign objects
exits, a cotton swab or lens paper can be used to wipe,
if it is difficult to remove, a neutral detergent diluted with
water would be useful. Do not use corrosive solution.
6. In order to make the camera work smoothly and
obtain asatisfactory image, the power cord and video
connection can not be too long, otherwise the increase
of line loss will lead to the inadequate magnitude of the
operating voltage of the camera or video signal
Inadequate.
7. In order to prevent the camera from falling, please
do not place the camera on an unstable bracket, base
or other unstable objects. Otherwise it will lead to
injury, at the same time, the camera will be damaged.
8. The camera cannot be placed near the radiator or
heating resistor.
Produktspezifikationen
Marke: | Provision ISR |
Kategorie: | Überwachungskamera |
Modell: | TVL-391AS36 |
Breite: | 68.5 mm |
Tiefe: | 206.5 mm |
Gewicht: | 380 g |
Produktfarbe: | Weiß |
Internationale Schutzart (IP-Code): | IP66 |
Übertragungstechnik: | Kabelgebunden |
Höhe: | 67.6 mm |
Energiequelle: | Gleichstrom |
Befestigungstyp: | Decke/Wand |
Betriebstemperatur: | -30 - 50 °C |
Typ: | IP-Sicherheitskamera |
Rauschverhältnis (SNR): | 60 dB |
Objektivdurchmesser: | 3.6 mm |
Größe des Bildsensors: | 1/2.8 " |
Formfaktor: | Bullet |
Maximale Auflösung: | 1920 x 1080 Pixel |
Megapixel insgesamt: | 2 MP |
Anzahl der Kameras: | 1 |
Tag/ Nachtmodus: | Ja |
Mindestbeleuchtung: | 0.0001 Lux |
Eingebaute HDD: | Nein |
Sensor-Typ: | CMOS |
Weißabgleich: | ATW, Manual |
Wide Dynamic Range (WDR): | Ja |
Anzahl der Sensoren: | 1 |
Vollbildverfahren: | Ja |
Anzahl der effektiven Pixel (H x V): | 1945 x 1097 Pixel |
Maximale Blendenzahl: | 1 |
Datenschutz-Maskierung: | Ja |
Gegenlichtkompensation: | Ja |
Video-Bewegungsmelder: | Ja |
Spiegel: | Ja |
Anzahl der Beleuchtungs-LEDs: | 2 |
DC Ausgangssstrom: | 0.48 A |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Provision ISR TVL-391AS36 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Überwachungskamera Provision ISR
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
Bedienungsanleitung Überwachungskamera
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
15 Oktober 2024
14 Oktober 2024
14 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
11 Oktober 2024
11 Oktober 2024
11 Oktober 2024