Pulse ShowerSpas 1010 Bedienungsanleitung


Lies die bedienungsanleitung für Pulse ShowerSpas 1010 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 12.5 Bewertungen. Hast du eine Frage zu Pulse ShowerSpas 1010 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Adjustable Slide Bar
Model #1010
Owner's Manual
SLIDE BAR
2
14
15
12
13
11
10
10
9
9
8
8
7
7
6
G
22 5/8" (575 mm)
M
J
I
H
(Not Included)
Adjustable Slide Bar Installation
1. Hold Adjustable Slide Bar (6) in desired mounting
location. Evaluate range of adjustment and potential
interference of handshower hose (15) (Diagram G).
2. Mark wall for two mounting holes. Before drilling
ensure no live plumbing could be damaged.
3. Slowly drill 1/4" (6mm) wide by 1" (25mm) deep
holes 22 5/8 inch (575mm) apart. Make sure holes are
plumb.
IMPORTANT: Supplied anchors are for solid surface
only i.e. tile, marble etc. If mounting to
hollow or fiberglass wall a different an-
chor/screw and hole size may be required.
4. Insert wall anchors (10) until flush with wall. Slide top
mount (7) over slide bar (Diagram H) and secure with
screw (8) (Diagram I).
5. Slide soap dish (12) (Diagram J) onto slide bar and
tighten set screw (11).
5. Slide lower mount (7) over slide bar and secure with
screw (8).
6. Press covers (9) into mounts (7) (Diagram M).
7. Place washer (14) in hex head of hose (15) and con-
nect to diverter outlet. Place washer (14) in smooth end
of hose and connect handshower (13). Place handshow-
er into holder. Handshower (13), washer (14), and hose
(15) not included.


Produktspezifikationen

Marke: Pulse ShowerSpas
Kategorie: Nicht kategorisiert
Modell: 1010

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pulse ShowerSpas 1010 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten