Puretec X4 Bedienungsanleitung
Lies die bedienungsanleitung für Puretec X4 (8 Seiten) kostenlos online; sie gehört zur Kategorie Wasserhahn. Dieses Handbuch wurde von 7 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 4 Bewertungen. Hast du eine Frage zu Puretec X4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
AS/NZS 3497
Licence No. WM 74617
Australian Certication
Services
NOV2018
User Guide
Inline Undersink Water Filter System
Puretec X3 / X4
For correct operation & installation it is essential to observe these instructions.
2 Installation & Operation Manual Copyright © Puretec Pty Ltd 2018
Puretec Customer Service
Thank you for purchasing a Puretec inline undersink water lter system. Your system is a
proven performer manufactured from only quality materials and components and will give
years of ‘spring fresh’ water free of impurities if maintained properly.
The Puretec system cartridges need replacing regularly to maintain optimum performance.
This is a simple procedure when following instructions. For cartridge replacements contact
your nearest Puretec stockist.
Customer Service Helpline (Australia) (New Zealand). 1300 140 140 0800 130 140
Operation
The Puretec inline undersink water lter systems are designed to run economically for many
years and this is dependant on the initial installation and periodical maintenance.
Flush systems for 10 minutes aer any period of non-use more than 2 days. For a period of
non-use of 2 weeks or more, it may be necessary to replace cartridge.
Cartridge Replacement
To maintain the high quality of the puried water the cartridges need changing every 6
months (this is dependant on water quality and usage).
What's inside
Operation ............................................................................................................................................... 2
Cartridge Replacement 2 ...................................................................................................................
Installation Requirements and Procedure ........................................................................... 3
Cartridge Changeout 4 .......................................................................................................................
Assembly ................................................................................................................................................ 5
Faucet Connections ..........................................................................................................................6
Battery Installation ................................................................................................................................6
Performance Data ............................................................................................................................. 7
Warranty .......................................................................................................................................................7
What's Inside
This product contains a button battery. Accidental ingestion may
occur and can be fatal. Please keep out of reach from infants. If you
suspect an accidental ingestion please contact emergency services.
3
Puretec X3 / X4 Series |
Inline Undersink Water Filter System
When replacing cartridge, ensure you reset the LED reminder light by removing/replacing the
battery from the rubber seat. Please refer to page 6 for a detailed diagram.
Replacement cartridge code for model : Puretec X3 IL149Q
Replacement cartridge code for model : Puretec X4 IL150Q
Installation
This system comes complete with an installation kit enabling it to be connected to 15 mm
(½”) male thread.
Installation Requirements
1 15mm (½”) Cold water line - mains only.
2 Supply pressure: 100 - 860 kPa.
3 Supply temperature 0° - 38°C.
4 Suitable location for faucet.
Alternative ttings may be required if being connected to anything other than 15 mm
(½”) copper pipe. No electrical or drainage requirements needed.
Installation Procedure
1. Select suitable location that is close to the point of ltered water delivery (eg. sink).
Remember to allow access room for changing lters and a suitable place where water
spillage will not cause damage. Location should not be in direct sunlight.
2. Isolate water supply and cut copper pipe ready to install the adaptor ballvalve.
3. Connect the ballvalve to the multivalve with a piece of white tubing.
4. Choose the best position for the faucet, taking into consideration height of jugs etc.
and also the drainage of any spills. Then drill a 012.5mm hole and install the faucet
as in step 5.
5. To install faucet, place the Escutcheon, O-Ring, Base Upholder into the Faucet (see
gure 3). Insert the Faucet into the hole in sink or bench. Slip the large Plastic Washer
and lock Washer onto threaded end of faucet and screw on Nut and tighten making
sure Faucet is correctly positioned on top.
6. Reset LED indicator by following instructions on page 6.
7. Install lter cartridge by positioning it in the desired location, marking the position
of xing hole and xing with bracket screw (Puretec inline cartridge can be mounted
horizontally or vertically). Allow room for the connecting tubes. Ensure ow arrow on
cartridge is in direction of water ow.
Installation
Produktspezifikationen
| Marke: | Puretec |
| Kategorie: | Wasserhahn |
| Modell: | X4 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Puretec X4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Wasserhahn Puretec
30 August 2025
30 August 2025
Bedienungsanleitung Wasserhahn
Neueste Bedienungsanleitung für -Kategorien-
2 September 2025
1 September 2025
1 September 2025
31 August 2025
31 August 2025
31 August 2025
31 August 2025
31 August 2025
31 August 2025
31 August 2025