Pyle Pro PWMA1216BM Bedienungsanleitung
Pyle Pro
Hi-Fi-Anlage
PWMA1216BM
Lies die bedienungsanleitung für Pyle Pro PWMA1216BM (8 Seiten) kostenlos online; sie gehört zur Kategorie Hi-Fi-Anlage. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 13 Bewertungen. Hast du eine Frage zu Pyle Pro PWMA1216BM oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
Portable PA Speaker Amplifier
& Microphone System
Bluetooth Wireless Streaming, Built-in Rechargeable Battery, Accessory Kit
(Includes Handheld Mic, Headset Mic, Lavalier Mic, Belt Pack Transmitter)
PWMA1216BM
www.PyleUSA.comwww.PyleUSA.com
2 3
CAUTION
1. This unit has a speaker inside which can cause magnetic eld. Keep this
unit at least 60cm away from computer or TV.
2. This unit has built-in rechargeable battery. Please recharge the battery
every 2 months if you are not going to use the unit for a long period of
time to prevent battery damage.
3. If the battery is damaged please replace with same specications battery
and dispose the damaged battery environment friendly.
4. Free from high temperature. Don't expose the device to hot equipment.
5. Don't place the device in the environment of humidity and dirts.
6. Place the device in the ventilated environment.
7. Don't pull the power cord while you pull out the plug. Hold the plug
tightly to pull it out.
8. Pull out the AC power if you will not use the device for a long time.
9. Your operation must be subjected to the specied voltage marked
near the AC in jack and complied with this guide.
PARTS DESCRIPTION
AC POWER OPERATION
Plug one end of provided AC cord into the AC input jack on the right side of
the amplier. Then plug the other end of AC cord into AC power outlet. Turn
on the unit using the power/volume switch.
NOTE:
To avoid damaging your unit, make sure AC power is same as that marked
near AC input jack)
DC POWER OPERATION
This unit can be powered also using external 12V DC power.
Connect external 12V DC power to DC input jack on top panel of the
amplier. Observe the correct polarity as following.
23
TRE BLE
BASS
ECH O
CHG
REC OUT MIC IN W/MIC VOL POWER
ON
OFF
MP3 VOL
DC 12V
15
14
13
12
11
10
9
8
7 6
5
4
3
2
1
16
17
18
19
20
21
22
10. T
1
1. Power ON/OFF switch
2. MP3 volume control
3. Power ON LED indicator
4. RF ON LED indicator
5. External DC input jack
6. Wireless receiver antenna
7. Charge LED indicator
8. Echo level control
9. Bass level control
reble level control
1. Record out jack
12. MIC Input jack
13. Wired/wireless MIC
volume control
14. MP3 display
15. MP3 mode
16. MP3 previous/volume-
17. MP3 next/volume+
18. MP3 play/pause
19. USB port
20. SD/MMC card slot
21. Speaker
22. AC input jack
23. Battery compartment
Produktspezifikationen
| Marke: | Pyle Pro |
| Kategorie: | Hi-Fi-Anlage |
| Modell: | PWMA1216BM |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Pyle Pro PWMA1216BM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hi-Fi-Anlage Pyle Pro
4 Oktober 2024
23 September 2024
14 Juli 2024
13 Juli 2024
10 Juli 2024
8 Juli 2024
5 Juli 2024
15 November 2022
9 November 2022
1 November 2022
Bedienungsanleitung Hi-Fi-Anlage
- EVE
- Crestron
- KEF
- Majestic
- Niles
- Nxg
- Nacon
- JB Systems
- Maginon
- CLXmusic
- Vantage Point
- Devialet
- SSV Works
- NGS
- CMX
Neueste Bedienungsanleitung für -Kategorien-
31 Juli 2025
31 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025