Pyle PDWM2135 Bedienungsanleitung

Pyle Mikrofon PDWM2135

Lies die bedienungsanleitung für Pyle PDWM2135 (6 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 9 Bewertungen. Hast du eine Frage zu Pyle PDWM2135 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/6
VHF Fixed Frequency Wireless Microphone System
PDWM2135 • PDWM2140 • PDWM2145
PDWM2135 PDWM2140
PDWM2145
1
*Each Wireless Microphone System operates within the qualied wireless
operating frequency range listed as: 174-216MHz.*
This microphone system operates on high-eciency, low-consumption
discharging techniques. Performance features include independent
developed mobile frequency compression,expander circuitry, image
frequency limiting circuits, multiple-checked silent and noise-free circuits,
antenna diversity receiving circuit & switch impact noise defeat circuits.
The PDWM2135 - PDWM2140 - PDWM2145 were manufactured to be easy to use
and still give you professional performance quality.
Simple Installation and Operation:
* Please note- select models come equipped with dierent transmitters
and microphones.
Unscrew the bottom of the microphone (or slide open the battery compartment
tray of the belt-pack transmitter) to install two 'AA' Batteries. Screw the Battery cap
back on.
Plug your receiving unit into your mixer or amplier with a 1/4" mono microphone
cord.
Plug the receiving unit into your electrical wall outlet.
Turn the receiver by using the switch located at the front of the unit.ON ON/OFF
There is a switch located on each of the two microphones that turns each
microphone & mutes them individually.ON/OFF
2
FEATURES AND SPECIFICATIONS
PDWM2135
System Features:
VHF Narrow Band Receiver System
Dual Frequency Design (Channel A/B)
High Signal/Noise Ratio Performance
Broad Frequency Response Range & Low Distortion
Independent Adjustable Volume Control
Dual Independent Channel Antennas
RF Signal and AF Signal LED Indicators
Radio Frequency and Audio Frequency
Handheld Microphones:
RF Power Output: >13dBm
Modulation Degree: >30KHz
Power Current: <110mA
Harmonic at Higher Degree: <60dB
Modulation Pattern: FM
Battery Powered, Require (2) x 'AA' Batteries -Each
System Receiver:
Sensitivity: -95dBm (S/N:12dB)
RF Image Rejection:-75dB
Audio Dynamic Range: 95dB
T.H.D.: <1%
S/N Ratio: >70dB
Neighboring Channel / Interference: >70dB
Power: AC 120V, 60Hz
Receiver Dimensions (L x W x H):
8.07'' x 5.75'' x 1.64''
What's in the Box:
Receiver Base
(2) Handheld Microphones


Produktspezifikationen

Marke: Pyle
Kategorie: Mikrofon
Modell: PDWM2135
Mikrofon-Typ: Handmikrofon
Anzahl Kanäle: 2 Kanäle
THD, totalklirren: 1 %
Rauschverhältnis (SNR): 70 dB
Receiver Typus: Empfänger für Rackmontage
Empfängerdimensionen (B x T x H): 204 x 146 x 41 mm
Empfängergewicht: 929 g
Mikrofon-Frequenzgang: 50 - 15000 Hz
Funkfrequenzbereich (RF): 174 - 216 MHz
Betriebsfrequenzart: Sehr hohe Frequenz (VHF)

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PDWM2135 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten