Pyle PDWR35WT Bedienungsanleitung

Lies die bedienungsanleitung für Pyle PDWR35WT (4 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet. Hast du eine Frage zu Pyle PDWR35WT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

/ 4 PDF

www.PyleUSA.com

2-Way Indoor/Outdoor Speaker System

Questions? Issues?

We are here to help!

Phone: (1) 718-535-1800

Email: support@pyleusa.com

MOUNTING

MOUNTING THE BRACKET

1. Remove the bracket knobs and the bracket from the speaker

2. Hold the bracket up to the mounting surface.

“” can be mounted either horizontally or vertically, hold the PDWR

bracket so that the speaker wire ts through the large, circular wire

hole in the bracket, align the bracket to be square with the

surrounding (Use A level for accuracy)

3. Mark the locations of the three shaped screw holes, use all of the

holes

4. Drill pilot holes into the mounting surface

5. Gently pull the speaker wire through the wire hole in the center of

the mounting bracket, the bracket so that the holes all line up.

6. Use your hardware to attach the bracket to the mounting surface.

FINAL ADJUSTMENTS

1. After checking that the speaker is in-phase and works correctly,

angle the speaker for the best sound.

2. Hand tighten the bracket knobs only, power tools may over-tighten

the knob, and strip the threads of the insert.

3. Check that the entire installation is safe and secure.

Produktspezifikationen