Pyle PGRDSP62BTB Bedienungsanleitung
Pyle
Lautsprecher
PGRDSP62BTB
Lies die bedienungsanleitung für Pyle PGRDSP62BTB (4 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 7 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 4 Bewertungen. Hast du eine Frage zu Pyle PGRDSP62BTB oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
www.PyleUSA.comwww.PyleUSA.com
Waterproof Outdoor
Wireless BT Streaming Garden Speaker
PGRDSP62BTB
6.5 Inch 6-1/2" Coaxial 2-way IP56
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Features:
• Portable and Waterproof Bluetooth Outdoor Garden Speaker
• Includes a 6-1/2” Coaxial Loudspeaker
• Body Made of Linear Low-Density Polyethylene
• Can be Placed on Several Surfaces, Such as Wood, Concrete or Into the Ground
• Suitable for Installation on Different Surfaces
• Protection Grade IP56
Wireless BT Streaming Connectivity:
• Built-in BT for Wireless Music Streaming
• Support TWS connection
• Simple and Hassle-Free Pairing
• Works with All of Today's Latest Devices
(Smartphones, Tablets, Laptops, computers, etc.)
• Wireless BT Version: 5.0
• Wireless BT Network Name: "PyleUSA"
• Wireless Range: 32.8' ft.
Technical Specs:
• RMS Output Power: 60W
• Minimum Speaker Impedance: 4 Ω
• Sensitivity(1M/1W): 89dB
• Frequency Response: 60Hz-20kHz
• Woofer Type: 6.5" Polypropylene cone with rubber edge
• Tweeter Type: 1"(25mm) Titanium dome tweeter
• Crossover Slope: 12dB/Octave
• Cabinet Material: Polyethylene with UV Prohibits
• IP Rate: IP56
• Amplier Type: Class AB
• Input Mode: Wireless BT
• Wireless BT Version: V5.0 with TWS connection
• Power Supply: AC100-240V
• Product Dimension: 16.1'' x 14.4'' x 14.4'' -inches
PyleUSA
www.PyleUSA.com www.PyleUSA.com
SAFETY INSTRUCTIONS
If problem arises, please check the FAQ below.
1. Read the instructions carefully before installation and use.
Keep the manual safe for future reference.
2. Ensure the location you have selected to install the speaker will provide
proper support and does not have obstructions that might interfere with
the sound. Never submerge the speaker in water.
3. Do not touch or bump the woofer and tweeter. If these are damaged, the
sound will be distorted.
4. Protect the power cable from being damaged. Do not stretch the power
cable or place it near sharp objects that may damage it.
5. A damaged cable must be repaired or replaced by an autorised electrician.
6. Never turn up your speaker volume to the point of distortion and always
reduce volume prior to switching input sources.
KNOW YOUR SPEAKER
The speaker usually needs a break-in period of 20-30h play time to reach
optimal sound quality.
This speaker has a built in equalizer that is optimized
for great outdoor sound. If you prefer different sound characteristics, please
adjust the equalizer, or treble/bass, on your music source.
WIRELESS BT STREAMING CONNECTION
1. Connect the speaker to the power supply then you will hear the sound
"pairing".
www.PyleUSA.com
2. Locate the speaker (named ) in the BT settings on your phone PyleUSA
and connect.
PAIRING SPEAKERS (optional)
1. Press the BT button on the main speaker for two seconds until you hear
the sound "True wireless stereo paired".
The main speaker is now ready to pair with the second speaker.
2. Now press the button on the second speaker for two seconds until you
hear the sound "True wireless stereo paired". Then wait for 3 seconds, until
you hear the sound "True wireless stereo connected".
If you wish to disconnect the second speaker, briey press (do not
hold) the BT bufton twice. You will hear the sound "True wireless stereo
Disconnected".
TROUBLESHOOTING
If a problem arises, please check the FAQ below
Q: The speaker has not been found during BT setup.
A:
1. Please check that the power cable is connected.
2. Make sure that you have pressed the speaker Wireless BT button to
activate BT.
3. Make sure that the speaker is within 10m range of your phone during setup.
Q: The speaker connects to the phone but there is no sound.
A: Ensure that the volume is turned up on the phone and that it is not muted.
Q: The sound is distorted when playing bass heavy music very loud.
A:
1. Turn down the volume until the distortion disappears.
2. Adjust the bass level in the equalizer (or treble/bass) on your phone.
Q: The second speaker (optional) does not pair with the rst speaker.
A: Follow the steps for pairing two speakers and make sure that the distance
/setween the two speakers is max 10m.
Press the speaker button for 10 seconds if you wish to delete all
connection data and restore to factory default setting.
CARE & MAINTENANCE
• Ensure all equipment is turned OFF prior to cleaning.
• Surfaces and cabinet need only occasional dusting/cleaning.
• Never touch the speaker drivers.
• Never use chemicals or solvents as they may damage the surface.
• Clean using a damp cloth.
Wireless BT
pairing button
Produktspezifikationen
| Marke: | Pyle |
| Kategorie: | Lautsprecher |
| Modell: | PGRDSP62BTB |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Pyle PGRDSP62BTB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Pyle
4 Juni 2025
4 Juni 2025
15 Oktober 2024
14 Oktober 2024
5 Oktober 2024
5 Oktober 2024
4 Oktober 2024
24 September 2024
20 September 2024
19 September 2024
Bedienungsanleitung Lautsprecher
- Bang And Olufsen
- Technika
- DIFRNCE
- Medeli
- Geneva
- IDance
- Empire
- Roth
- Crestron
- V-TAC
- UGo
- HEDD
- Tronios
- Tascam
- Kenwood
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025