Pyle PHMD05 Bedienungsanleitung

Pyle Detektor PHMD05

Lies die bedienungsanleitung für Pyle PHMD05 (2 Seiten) kostenlos online; sie gehört zur Kategorie Detektor. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 15.5 Bewertungen. Hast du eine Frage zu Pyle PHMD05 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
I. Illustration:
1. Handle
2. Switch (on/off)
3. Sensitivity tuning
4. Upper stem
5. Stem Lock Nut (to adjust the length of inner stem)
6. Lower stem
7. Knob (to adjust the angle of search coil)
8. Search coil
II. Detection Distance:
1. Iron nail: 1 ¼ - 2 ½ inches
2. US 25 cent: 1 ½ - 2 inch es
III. Features:
1. High sensitivity;
2. Easy and simple to operate;
3. Detection distance kept steady when 9V battery is used;
1
4. Save power. Alkaline battery can work over 45 hours.
5. Alarm sounds when you turn the device on or off.
IV. Installing Battery:
1. Press thumb along the direction of arrowhead mark to open the battery lid.
2. Put 1*9V (Type: 6F22) battery into the compartment matching the positive
and negative marks.
3. Close the battery cover.
V. How to use:
1. To turn the unit on by pushing the on/off switch until it clicks on and the
green LED is lit. The detector is now operational. Check the battery if there
is no audio alarm beeping.
2. Holding the unit with the search coil face towards the surface, sweep
backwards and forwards continuously at a height of ½ - 1 inch above the
area that you are scanning.
3. The presence of metal will be indicated by the audio warning tone and the
red light coming on.
4. The length of the inner stem can be adjusted automatically.
VI. Sensitivity Tune:
1. just the sensitivity; if device attain required detection distance Ad a cannot
or the sensitivity is too high.
2


Produktspezifikationen

Marke: Pyle
Kategorie: Detektor
Modell: PHMD05

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PHMD05 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten